JVC LYT0415-001A During recording, the indications do not appear, Tape will not eject, Disappear

Page 51

EN51

SYMPTOM

POSSIBLE CAUSE(S)

OTHER

During recording, the indications do not appear.

●Press DISPLAY for longer than 1 second to make the indications appear (☞ pg. 13).

The tape will not eject.

● The battery pack is running low.

 

● If the LCD monitor is not open over 60 degrees, the EJECT

 

Switch does not function.

 

 

Some functions are not available.

● The Power Switch is set to “AUTO”.

 

● Certain combinations of modes or effects are not possible

 

to use.

 

 

Vertical white lines appear when

● This sometimes occurs when the contrast between the

shooting a very bright object.

background and the object is great. It is not a defect of the

 

camcorder.

 

 

Bright, crystal-shaped spots appear in

● Sunlight is directly entering the lens. This is not a defect of

the LCD monitor and the viewfinder.

the camcorder.

 

 

The rear of the LCD monitor is hot.

● The light used to illuminate the LCD monitor causes it to be

 

hot. Close the LCD monitor to turn it off or set the Power

 

Switch to “OFF”, and let the unit cool down.

 

 

Coloured bright spots appear all over

● The LCD monitor and the viewfinder are made with high-

the LCD monitor or the viewfinder.

precision technology. However, black spots or bright spots

 

of light (red, green or blue) may appear constantly on the

 

LCD monitor or in the viewfinder. These spots are not

 

recorded on the tape. This is not due to any defect of the

 

unit. (Effective dots: more than 99.99 %.)

 

 

The indicators and the picture colour

● This may occur when the surface or the edge of the LCD

on the LCD monitor are not clear.

monitor is pressed.

 

 

The LCD monitor, the viewfinder and

● Wipe them gently with a soft cloth. Gently wipe in a

the lens have become dirty (ex.

semicircular motion, as wiping strongly spreads the stain

fingerprints).

and it won’t come out easily.

 

 

An error number (i.e. E03) appears.

● Turn the camcorder’s power off, then disconnect the power

 

source. After a few minutes, try turning the power on again.

 

If the error number still appears, consult your nearest JVC

 

dealer.

 

 

The image is out of focus.

● The dioptre needs to be adjusted (☞ pg. 10).

 

● The scene being shot is adversely affecting the operation of

 

Auto Focus (☞ pg. 30).

 

 

The picture is blurred in the Quick

● This is normal while recording in the LP mode. Some noise

Review or Retake mode.

may be present while recording in the SP mode (☞ pg. 8).

 

 

The date and time displays

● If you remove the power source from the camcorder while

disappear.

the power is on, all settings and selections are erased. Make

 

sure to turn the camcorder’s power off before disconnecting

 

the power source.

 

 

The wrong date and time are

● If you have not performed Date/Time Setting (☞ pg. 7), the

displayed/recorded.

date and time are not displayed/recorded correctly. Be sure

 

that Date/Time setting is carried out.

Even though the lens cover is open, the Lens Cover Warning indicator blinks.

●The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the lens cover.

Page 50 Page 52
Image 51
Page 50 Page 52
Contents GR-FXM50 It is recommended that you Dear CustomerContents Power Charging the Battery PackUsing the Battery Pack Using AC Power Using a CAR BatteryDischarged Insert Battery in Holder Clock Lithium Battery Insertion/RemovalSwitch OFF Power Remove Battery HolderDate/Time Settings SET Tape Length Recording Mode SettingTape Length Setting SET Recording ModeLoading/Unloading a Cassette Grip Adjustment Viewfinder Adjustment10 EN Attach Strap Adjust LengthShoulder Strap Attachment Tripod MountingShooting While Watching The Viewfinder Power Switch Position12 EN Recording Basic RecordingRecording LCD Monitor/Viewfinder IndicationsStop Recording Press Display ButtonBefore the following steps, perform pg Power Switch Recording Start/Stop Button Power lamp14 EN Shooting While Watching The LCD MonitorJournalistic Shooting Interface ShootingBrightness Control Zoom Basic FeaturesPush the Power Zoom Lever towards T Power SwitchTo check the end of the last recording Feature Quick Review18 EN Feature Picture StabilizerStabilizer Button Power Switch Display Picture stabilizer indicatorFeature 5 Sec. Rec 5-sec. Recording SEC. REC Button Power Switch DisplaySec. Rec mode indicator Light OFF/AUTO/ON Switch Feature Video LightTo brighten the scene when natural lighting is too dim Battery powerStart or END Recording Recording Advanced Features EN21Tomodecancel FADE- or WIPE-STANDBY Fade/WipeProgramme AE With Special Effects Advanced FeaturesSelect Mode 22 ENColours of a picture are reversed Display ModeNega Posi mode High shutter speed clearly captures fast-moving actionPress the Select Dial to display the Menu Screen Recording Advanced Features24 EN Date/Time InsertAccess Title Menu Select the Desired ModeInstant Titles 26 EN Using Menu For Detailed AdjustmentMake Setting END SettingMenu Screen Available Using The Select Dial Menu Screen Available Using The Menu ButtonMenu Screen Explanations 28 EN END Adjustment of Exposure Access Exposure MenuAccess Manual Exposure Adjust ExposurePatterns that are regularly repeated Focusing30 EN Auto FocusEND Adjustment of Focus Access Focus MenuAccess Manual Focus Adjust FocusSET Function Parameters White Balance AdjustmentAccess White Balance Adjustment 32 ENTo Change The Tint For Recording Enter SettingManual White Balance Operation SET Manual White Balance34 EN Self-TimerAccess INT. Time Menu Start Delayed RecordingTime-Lapse AnimationPlay Back 36 ENPlayback Basic Playback Rewind or Fast-Forward the tapeTracking Speaker Volume ControlAdjust the brightness of the LCD monitor Adjust VolumeFeature Counter Memory Function Playback FeaturesFeature Still Playback Feature Shuttle SearchCassette Adapter Using The Cassette Adapter EN39Insert Battery Recording safety holeConnection For Tape Dubbing 40 ENBasic Connections And Tape Dubbing Basic ConnectionsTape Dubbing Buttons Installing The BatteryPull OUT Battery Holder FunctionsTime-Lapse Feature Self-Timer, Animation Time-LapseSelf-Timer AnimationOperate VCR 44 ENRandom Assemble Editing R.A.Edit SET REMOTE/VCR CodePrepare Camcorder Make ConnectionsJVC VCR Equipped with Remote Pause Terminal VCR Other than Type orRegister END of Scene 46 ENSelect Scenes Start Source PlaybackEND Automatic Editing Automatic Editing to VCRPrepare Source Tape Begin Automatic EditingInsert Editing 48 ENEND Audio Dubbing Audio DubbingAudio Dubbing Begin Audio Dubbing50 EN Tape will not eject An error number i.e. E03 appearsReview or Retake mode During recording, the indications do not appear52EN Index Controls, Connectors And IndicatorsOther Parts ConnectorsIndicators ControlsIndex Indications 54ENStore cassettes For safety, do notTo avoid hazard During useDo not leave the unit Avoid using the unitTo prolong service life Cleaning The CamcorderPower consumption Storage temperature ConnectorsProvided Accessories Optional Accessories Operating temperatureMemo Memo GR-FXM50

LYT0415-001A, GR-FXM50 specifications

The JVC GR-FXM50, LYT0415-001A, is a compact and innovative camcorder that was designed for those who seek high-quality video recording and user-friendly features. This model combines advanced technology with ease of use, appealing to both amateur videographers and professionals alike.

One of the standout features of the JVC GR-FXM50 is its incredible video quality, which is achieved through a 1/6-inch CCD sensor. This sensor captures vivid colors and sharp details, ensuring that your videos have a professional touch. The camcorder supports various video resolutions, enabling users to select the most suitable option for their needs. Its ability to record in 16:9 aspect ratio caters to the growing trend of widescreen viewing, making it perfect for modern displays.

The GR-FXM50 is equipped with a powerful zoom lens that offers a 10x optical zoom and 800x digital zoom capabilities. This range provides flexibility for capturing distant subjects while maintaining video clarity. Additionally, the lens features a built-in image stabilization technology which minimizes the effects of camera shake, leading to smoother and more stable footage, even in dynamic shooting conditions.

Another notable characteristic of the GR-FXM50 is its user-friendly interface. The camcorder features an easy-to-navigate menu and a bright LCD screen that allows for effortless framing and playback of recordings. The LCD screen is also rotatable, which adds convenience for vlogging or shooting at various angles.

Audio quality is equally important in video production, and the GR-FXM50 does not disappoint. It features a built-in microphone that captures clear sound, along with an input for an external microphone, giving users the option to enhance audio capture further.

The camcorder's compact design makes it portable and perfect for on-the-go shooting. With a lightweight body, it easily fits into bags or backpacks, so capturing moments while traveling or during events is hassle-free. Furthermore, the GR-FXM50 is equipped with a reliable battery that ensures extended recording times, allowing users to film without constant interruptions.

Overall, the JVC GR-FXM50, LYT0415-001A, combines cutting-edge video technology, user-focused design, and portability, making it an excellent choice for anyone looking to create high-quality video content. Whether documenting personal memories or creating professional-grade videos, this camcorder meets the demands of diverse filming situations with ease.
Top Page Image Contents