JVC GR-FXM50, LYT0415-001A manual 50 EN

Page 50

50EN

TROUBLESHOOTING

If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as usual from the beginning.

SYMPTOM

 

POSSIBLE CAUSE(S)

POWER

 

 

No power is supplied.

 

● The battery pack has not been attached correctly

 

 

(☞ pg. 4).

 

 

● The battery pack is not charged (☞ pg. 4).

 

 

● The power supply has not been correctly connected

 

 

(☞ pg. 5).

 

 

 

The power suddenly goes off and

 

● The battery pack has completely discharged.

does not come back on by itself.

 

● Remove the cassette and disconnect the power source, then

 

 

after a few minutes, try turning the power back on. If it still

 

 

does not come on, consult your nearest JVC dealer.

 

 

 

RECORDING

 

 

Recording cannot be performed.

 

● Make sure the Erase Protection tab is in the position that

 

 

allows recording. If not, slide the tab. Some cassettes have

 

 

removable tabs. If the tab has been removed, cover the

 

 

hole with adhesive tape.

 

 

 

Recording does not start.

 

● The camcorder Power Switch has not been set to

 

 

“CAMERA” (“AUTO” or “PRO.”) (☞ pg. 12).

 

 

 

Animation or Time-Lapse is not

 

● Before recording in the Animation mode at the very

available.

 

beginning of a tape, set the camcorder to the Recording

 

 

mode for about 5 seconds, so that the tape runs smoothly.

 

 

Using the Fade-in function at this point is a good way to

 

 

begin an animated program (☞ pg. 35, 43).

 

 

 

PLAYBACK

 

 

The tape is running, but there is no

 

● The TV has not been set to its VIDEO mode or channel.

playback picture.

 

● If A/V connection is used, the TV’s VIDEO/TV Switch has

 

 

not been set to VIDEO.

 

 

 

Playback picture is blurred or

 

● The video heads are dirty or worn out. Consult your nearest

interrupted.

 

JVC dealer for head cleaning or replacement.

 

 

 

The counter indication is blurred

 

● This is normal.

during Still playback.

 

 

 

 

 

TAPE TRANSPORT

 

 

The tape stops during fast-forward or

 

● The Counter Memory Function has been activated

rewind.

 

(☞ pg. 38).

Rewinding or fast-forwarding cannot

● The tape is already fully wound on one reel or the other.

be performed.

 

Page 49 Page 51
Image 50
Page 49 Page 51
Contents GR-FXM50 Dear Customer It is recommended that youContents Using the Battery Pack PowerCharging the Battery Pack Discharged Using AC PowerUsing a CAR Battery Remove Battery Holder Clock Lithium Battery Insertion/RemovalSwitch OFF Power Insert Battery in HolderDate/Time Settings SET Recording Mode Recording Mode SettingTape Length Setting SET Tape LengthLoading/Unloading a Cassette 10 EN Grip AdjustmentViewfinder Adjustment Tripod Mounting Adjust LengthShoulder Strap Attachment Attach StrapRecording Basic Recording Power Switch Position12 EN Shooting While Watching The ViewfinderPress Display Button LCD Monitor/Viewfinder IndicationsStop Recording RecordingShooting While Watching The LCD Monitor Power Switch Recording Start/Stop Button Power lamp14 EN Before the following steps, perform pgBrightness Control Journalistic ShootingInterface Shooting Power Switch Basic FeaturesPush the Power Zoom Lever towards T ZoomFeature Quick Review To check the end of the last recordingPicture stabilizer indicator Feature Picture StabilizerStabilizer Button Power Switch Display 18 ENSec. Rec mode indicator Feature 5 Sec. Rec 5-sec. RecordingSEC. REC Button Power Switch Display Battery power Feature Video LightTo brighten the scene when natural lighting is too dim Light OFF/AUTO/ON SwitchFade/Wipe Recording Advanced Features EN21Tomodecancel FADE- or WIPE-STANDBY Start or END Recording22 EN Advanced FeaturesSelect Mode Programme AE With Special EffectsHigh shutter speed clearly captures fast-moving action Display ModeNega Posi mode Colours of a picture are reversedDate/Time Insert Recording Advanced Features24 EN Press the Select Dial to display the Menu ScreenInstant Titles Access Title MenuSelect the Desired Mode END Setting Using Menu For Detailed AdjustmentMake Setting 26 ENMenu Screen Explanations Menu Screen Available Using The Select DialMenu Screen Available Using The Menu Button 28 EN Adjust Exposure Access Exposure MenuAccess Manual Exposure END Adjustment of ExposureAuto Focus Focusing30 EN Patterns that are regularly repeatedAdjust Focus Access Focus MenuAccess Manual Focus END Adjustment of Focus32 EN White Balance AdjustmentAccess White Balance Adjustment SET Function ParametersSET Manual White Balance Enter SettingManual White Balance Operation To Change The Tint For RecordingStart Delayed Recording Self-TimerAccess INT. Time Menu 34 ENAnimation Time-LapseRewind or Fast-Forward the tape 36 ENPlayback Basic Playback Play BackAdjust Volume Speaker Volume ControlAdjust the brightness of the LCD monitor TrackingFeature Shuttle Search Playback FeaturesFeature Still Playback Feature Counter Memory FunctionRecording safety hole Using The Cassette Adapter EN39Insert Battery Cassette AdapterBasic Connections 40 ENBasic Connections And Tape Dubbing Connection For Tape DubbingTape Dubbing Functions Installing The BatteryPull OUT Battery Holder ButtonsAnimation Feature Self-Timer, Animation Time-LapseSelf-Timer Time-LapseSET REMOTE/VCR Code 44 ENRandom Assemble Editing R.A.Edit Operate VCRVCR Other than Type or Make ConnectionsJVC VCR Equipped with Remote Pause Terminal Prepare CamcorderStart Source Playback 46 ENSelect Scenes Register END of SceneBegin Automatic Editing Automatic Editing to VCRPrepare Source Tape END Automatic Editing48 EN Insert EditingBegin Audio Dubbing Audio DubbingAudio Dubbing END Audio Dubbing50 EN During recording, the indications do not appear An error number i.e. E03 appearsReview or Retake mode Tape will not ejectIndex Controls, Connectors And Indicators 52ENControls ConnectorsIndicators Other Parts54EN Index IndicationsDuring use For safety, do notTo avoid hazard Store cassettesCleaning The Camcorder Avoid using the unitTo prolong service life Do not leave the unitOperating temperature ConnectorsProvided Accessories Optional Accessories Power consumption Storage temperatureMemo Memo GR-FXM50

LYT0415-001A, GR-FXM50 specifications

The JVC GR-FXM50, LYT0415-001A, is a compact and innovative camcorder that was designed for those who seek high-quality video recording and user-friendly features. This model combines advanced technology with ease of use, appealing to both amateur videographers and professionals alike.

One of the standout features of the JVC GR-FXM50 is its incredible video quality, which is achieved through a 1/6-inch CCD sensor. This sensor captures vivid colors and sharp details, ensuring that your videos have a professional touch. The camcorder supports various video resolutions, enabling users to select the most suitable option for their needs. Its ability to record in 16:9 aspect ratio caters to the growing trend of widescreen viewing, making it perfect for modern displays.

The GR-FXM50 is equipped with a powerful zoom lens that offers a 10x optical zoom and 800x digital zoom capabilities. This range provides flexibility for capturing distant subjects while maintaining video clarity. Additionally, the lens features a built-in image stabilization technology which minimizes the effects of camera shake, leading to smoother and more stable footage, even in dynamic shooting conditions.

Another notable characteristic of the GR-FXM50 is its user-friendly interface. The camcorder features an easy-to-navigate menu and a bright LCD screen that allows for effortless framing and playback of recordings. The LCD screen is also rotatable, which adds convenience for vlogging or shooting at various angles.

Audio quality is equally important in video production, and the GR-FXM50 does not disappoint. It features a built-in microphone that captures clear sound, along with an input for an external microphone, giving users the option to enhance audio capture further.

The camcorder's compact design makes it portable and perfect for on-the-go shooting. With a lightweight body, it easily fits into bags or backpacks, so capturing moments while traveling or during events is hassle-free. Furthermore, the GR-FXM50 is equipped with a reliable battery that ensures extended recording times, allowing users to film without constant interruptions.

Overall, the JVC GR-FXM50, LYT0415-001A, combines cutting-edge video technology, user-focused design, and portability, making it an excellent choice for anyone looking to create high-quality video content. Whether documenting personal memories or creating professional-grade videos, this camcorder meets the demands of diverse filming situations with ease.
Top Page Image Contents