JVC GR-AXM307EG instruction manual Wide

20EN	RECORDING
FADE IN	Fader

AdvancedFeatures(cont.)

FADE OUT

Function indication

LCD monitor

FADE

or viewfinder

FADE

Fade-Standby indication

SET button

SEL. button

PROGRAM AE select dial

This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and fade-out works at recording end or when you enter Record–Standby mode.

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

SELECT FUNCTION

2 Press SEL. repeatedly until “FADE” appears.

ENGAGE FADE-STANDBY MODE

3 Press SET to engage the Fade-Standby mode.

The Fade-Standby indication “FADE” is displayed.

START RECORDING

4 Press Recording Start/Stop to start recording and activate fade-in.

OR . . .

END RECORDING

Press Recording Start/Stop to end recording and engage fade-out.

NOTES:

●Pressing and holding the Recording Start/Stop button allows you to record a black blank screen.

●The screen becomes slightly reddish when the Fader is used with Sepia (☞ pg. 16).

●With the Electronic fog filter mode (☞ pg. 16) engaged, the image fades in/out to a white screen.

Wide

This feature allows you to record black bars at the top and bottom of the screen to produce a cinema-like “wide-screen” effect.

LCD monitor or viewfinder

Wide mode

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

SELECT FUNCTION

2 Press SEL. repeatedly until “WIDE” appears.

ENGAGE WIDE MODE

3 Press SET.

RESTORE NORMAL SCREEN

4 Press SET again while “WIDE” appears.