JVC LYT1133-001A, GR-SXM195AS manual Date/Time Settings

•The following steps have the same function as

“REFRESH” (
pg. 6).

1)Attach the battery to the camcorder with no cassette inserted.

2)Set the Power Switch @ to “ ” or “ ” while pressing down the Lock Button ! located on the

switch.

• During charging or discharging, the camcorder
cannot be operated.
• Charging and discharging is not possible if the
wrong type of battery is used.
• When charging the battery pack for the first time
or after a long storage period, the CHARGE lamp
( may not light. Remove the battery pack from
the camcorder, then try charging again.
• If a fully-charged battery’s operation time remains
extremely short, the battery is worn out. Please
purchase a new one.
• Perform charging where the temperature is
between 10°C and 35°C. 20°C to 25°C is the ideal
temperature range for charging. If the environment
is too cold, charging may be incomplete.
• Charging time varies according to the ambient
temperature and the status of the battery pack.
• Since the AC Adapter processes electricity
internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
• The following operation stops charging or
discharging:
• Set the Power Switch @ to “	”, “ ” or “ ”.
• Disconnect the AC Adapter from the camcorder.
• Unplug the AC Adapter’s power cord from the
AC outlet.
• Detach the battery from the camcorder.
• Using the optional AA-V15 AC Power Adapter/
Charger, you can charge the BN-V11U/V12U/
V20U/V400U battery pack without the camcorder.
However, it cannot be used as an AC adapter.
• To avoid interference with reception, do not use
the AC Adapter near a radio.

Date/Time Settings

1)Set the Power Switch @ to “ ” while pressing down the Lock Button ! located on the switch.

2)Press the MENU Wheel 1 in. The Menu

Screen appears.

•You can select the language (ENGLISH, CHINESE or ARABIC) used in all messages

displayed on screen (
pg. 18, 22 “MENU LANG.” in SYSTEM MENU).

3)Rotate the MENU Wheel 1 to select

“4TO SYSTEM MENU” and press it to display SYSTEM MENU. Rotate the MENU Wheel 1 to select “4NEXT” and press it to display the next page.

4)Rotate the MENU Wheel 1 to select “DATE/ TIME” and press it. The DATE/TIME Menu appears.

5)To set “YEAR”, “MONTH”, “DAY” or “TIME” (hour/minute), rotate the MENU Wheel 1 to select the desired item, and press it. When the setting begins blinking, rotate the MENU Wheel 1 until the correct setting appears and then press it. The setting stops blinking.

6)When none of these settings (“YEAR”,

“MONTH”, “DAY”, “TIME”) blinks, rotate the MENU Wheel 1 to select “4EXIT”, and press it. The Menu Screen reappears with the highlight bar on “4RETURN”.

7)Press the MENU Wheel 1 in to close the Menu Screen.

•To display the date and time in the camcorder’s

display and on a connected TV, see DATE/TIME DISP. (
pg. 21) in SYSTEM MENU.

•The date/time cannot be stored in memory if the built-in clock battery runs out. Consult an authorised JVC dealer for replacement, or set the date/time as necessary before you start shooting.

• Recording time is reduced significantly when

Zoom or Record-Standby mode is engaged

repeatedly or the LCD monitor is used repeatedly.

• Before extended use, it is recommended that you

prepare enough battery packs to cover 3 times the

planned shooting time.

	D A T E	T I M E
Y E A R	H	2	0 0 3
M O N T				6
D A Y				2 8
T I M E		2 0		: 2 0

1

@

!

24-hour indication

4E X I T

7