JVC GY-DV550 instruction manual Rear Section

	2. CONTROLS, INDICATORS AND CONNECTORS
2-5 Adapter Section (continued)
	PUSH
	7
	VTR/RM		DV CAMCORDER
			GY-DV550
8
	PROMPTER
	OUTPUT
9			GENLOCK/AUX IN
	Y/C OUT MONITOR OUT	LINE OUT	VIDEO OUT
		CH-1 CH-2
			REMOTE
			AUDIO IN
			FRONT
	TC IN	TC OUT	LENS

8	[VTR/RM] VTR/RM multi-pin connector (26P)
	This connector is used to connect an external VCR or
	camera control unit. Camera image signals are outputted
	from this connector.
	Set MODE switch 6 according to the connecting device.
	Memo:

2. CONTROLS, INDICATORS AND CONNECTORS

2-6 Rear Section
					!0
					PUSH
				o
					VTR/RM	DV CAMCORD
						GY-DV550
				t	PROMPTER
					OUTPUT
				y	Y/C OUT MONITOR OUT LINE OUT
						CH-1 CH-2
						!1
q	DV LINE	MIC	LINE MICINTERCOM			REMOT
		+48V	+48V
		ON	ON	DC INPUT
w	EARPHONE		FRONT		TC IN	TC OUT
			AUDIO IN
	DC		REAR
	OUTPUT
e
		r	u	i
						BREAKER

•Camera images of this unit are recorded on the external VCR. Compost video signals from GENLOCK/ AUX IN connector 8 on page 18 are not recorded.

•When recording on an external VCR, set the VTR INPUT switch 9 on page 15 to CAM and set the VTR SELECT switch = to PARA or EXT.

•Only CH1 audio can be outputted for audio signals.

9	[PROMPTER OUTPUT] prompter output connector
	Return video signals of the external VCR or signals inputted
	to the AUX input connector of the camera remote control
	unit are outputted through VTR/RM multi-pin connector 8.

1	[DV] connector
	Using a DV cable (optional), a digital video component with
	DV connector can be connected here.
	This connector is used for output of the DV signal or to
	input the VCR control signal from the digital video
	component with DV connector.
	• To remote control the VCR with a VCR control signal from
	this connector, set the VCR Setup Menu item No. 050
	REMOTE SELECT to "IEEE1394".

2	[EARPHONE] earphone jack
	This is a mini-jack for connecting an audio monitoring
	earphone. Plug in an earphone or headphone with a 3.5
	mm diameter plug. Audio is outputted in monaural.
	The earphone can also be used to monitor alarm tones
	depending on situations.
	The sound from the monitoring loudspeaker is interrupted
	when an earphone is connected here.

3	[DC OUTPUT] connector
	Power output connector to a wireless microphone
	transmitter, etc.The supply voltage is identical to the voltage
	supplied to the unit (DC 12V max. 0.1 A).

			Bottom side
4	[AUDIO IN REAR] audio input rear connector (XLR
	3-pin)
	Connect the external audio equipment or microphone to
	this connector. Set the AUDIO IN REAR LINE/MIC select
	switch 5 according to the connected equipment.
	To record the audio of this connector, set the CH-1 AUDIO
	INPUT switch 7 or the CH-2 AUDIO INPUT switch 8 on
	page 14 to "REAR".
	(AUDIO IN connector)
		No.	Signal

1GND

2		1	2	HOT
	3		3	COLD

5	[AUDIO IN REAR LINE/MIC] AUDIO IN REAR select
	switch
	Selects the audio signal input to the 4 AUDIO IN REAR
	connector.
	LINE : Set to this position when connected to audio
	equipment, etc. The reference input level is +4 dBs.

4	1
3	2
(Surface profile)

No.

1

2

3

4

Signal

GND

—

—

DC +12V (power through)

MIC	: Set to this position when the microphone is
	connected. The reference input level is -60 dBs.
MIC +48V ON:
	Set to this position when the microphone requiring
	+48 V power supply (phantom microphone, etc.) is
	connected.
	This connector supplies +48 V DC current.

21 22