Bogen UDMS800BP UDR800 Receiver, Rack Mounting the Receiver, Powering the Receiver, Antennas

Page 5

UDR800 RECEIVER

1.Rack Mounting the Receiver

There are 2 options available (as accessories) for rack mounting the UDR800 receiver: single or side-by-side with another UDR800 receiver.

A.Single Mounting (RPK89): Remove the receiver SIDE MOUNT CLIPS (1) from each side of the receiver (as shown) and slide in the optional wider RACK EARS (2). (see page 4)

B.Side-by-Side Double Mounting (RPK90): After removing the SIDE MOUNT CLIPS (1) from both UDR800 receivers, join the two receivers with the JOINING CLIP (3) and attach the narrow RACK EARS (4) as shown. (see page 4)

(Note: Do not mount the receiver in a rack directly above an amplifier or other source of high heat — this could degrade the performance of the UDR800. Always ensure adequate airflow and heat dissipation in any rack configuration.)

2.Powering the Receiver

Plug the 22V DC ADAPTER (28) provided into the DC INPUT JACK (6) on the back of the receiver. Then plug the power supply into an AC outlet. Press the POWER SWITCH (9) once to turn on the receiver. The POWER “ON” LED (10) will now light and the receiver is operational.

3.Antennas

The UDR800 receiver is equipped with attached dual FOLDING ANTENNAS (11). Optimal positions of the antennas are 45° from the receiver (or 90° from each other). For maximum range, it is always best to maintain a line-of-sight (no obstructions) between the receiver antennas and the transmitter at all times whenever possible.

4. Adjusting the Mute Level/RF Squelch

The MUTE LEVEL/RF SQUELCH (24) can be changed anytime during the main screen display to quiet the receiver in high noise environment conditions. The control ranges are from level 0 to level 5. The level should be adjusted to a lower number to the minimum RF squelch setting at which the RF INDICATOR (19) will remain on while your transmitter is in normal use, up to the maximum operating range anticipated in use for your application. However, in areas of high RF activity, the squelch control may need to be adjusted to a higher number. If the transmitter is off and the receiver signal RF INDICATOR (19) or the diversity A or B INDICATOR (20) flickers or stays on continuously, the squelch should be adjusted to a higher number to stop the flickering. Be careful not to select too high a number setting as this may reduce the operating range to below what is needed. A range walk test will help in selecting the proper level. If the range is not critical, note that a higher level (maximum squelch) setting will also yield a quieter mute function, which might be desired in certain applications. The squelch level is factory preset at maximum sensitivity and operating range (i.e. level 0 for minimum squelch level — maximum usable range).

(Note: For easier intuitive operation, the MIN and MAX indicators for this control refer to the minimum and maximum operating range settings, not to the actual mute levels selected, which are the opposite as per above.)

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents UDMS800HH UDMS800BP This Page Intentionally Left Blank Introduction ContentsUsing this Manual UDR800 Receiver System FeaturesAdjusting the Mute Level/RF Squelch Powering the ReceiverUDR800 Receiver Rack Mounting the ReceiverDouble Mounting Requires RPK90 UDR800 Audio Level and Peak LED IndicatorConnecting the Audio Output Rear View UHT800 Handheld MIC Transmitter Microphone Battery InstallationProgramming UHT800 to Selected Group/Channel Frequency Operating the UHT800 Handheld MIC TransmitterUHT800 UBP800 BODY-PACK MIC Transmitter UBP800 Receiver ASCTM/IR Sync GR/CH Frequency Choosing Group/Channel for the SystemReceiver ASCTM/IR Sync Manual Programming Locking Front Panel Controls Front Panel LOCK-OUTFrequency Listings Frequency PlanOverall System Performance SpecificationsLimited Warranty Exclusion of Certain Damages Page Page Spring Street, Ramsey, NJ 07446, U.S.A Tel -934-8500 Fax

UDMS800BP, UDMS800HH specifications

The Bogen UDMS800HH and UDMS800BP are advanced public address systems designed to deliver high-quality sound and reliable performance in various settings. These models are particularly favored in educational institutions, corporate environments, and large venues where effective communication is crucial.

The UDMS800HH features a handheld microphone that allows for mobility and flexibility during presentations or speeches. It utilizes UHF (Ultra High Frequency) technology, ensuring clear audio transmission over long distances with minimal interference. The handheld microphone is lightweight and ergonomically designed for comfortable use during extended periods. The microphone also incorporates a built-in rechargeable battery, providing convenience and reducing the need for constant battery replacements.

On the other hand, the UDMS800BP boasts a belt-pack transmitter, which is ideal for hands-free applications. This model is often paired with lavalier or headset microphones, making it perfect for teachers or presenters who need to move around while engaging their audience. The belt-pack design allows users to clip it onto their waist or belt, providing a wireless experience without the hassle of cords.

Both models are equipped with easy-to-use controls for volume adjustment, channel selection, and power on/off, making it user-friendly for novice and experienced operators alike. The systems feature a robust construction resistant to wear and tear, ensuring durability even in demanding environments.

Another significant characteristic is the wide frequency response and low distortion, which guarantee natural sound reproduction. Bogen's proprietary technologies enhance audio clarity, making them suitable for spoken word applications and musical performances alike.

The UDMS800 series includes multiple channels, which enables the use of several systems in the same venue without risk of interference. This is particularly important in conference situations or events where multiple speakers may be required.

Overall, the Bogen UDMS800HH and UDMS800BP are versatile, powerful, and reliable PA systems. With their thoughtful design, superior sound quality, and user-friendly features, they are an excellent choice for anyone needing effective audio solutions in a variety of professional settings.
Top Page Image Contents