ND1 Filter ND1 1/4ND | JVC GY-HD100, GY-HD101 guide

(Example) 7.0V: Indicates remaining battery level in 0.1V steps.

(Example) Time code TC 00 : 00 : 00 : 00

Colon (:) when non-drop frame mode Dot (.) when drop frame mode

User’s bits UB FF EE DD 20

Whether or not to display this item is set with the TC/UB item on the LCD/VF [2/3] menu screen. X See page 72.

Whether the time code or user’s bits should be shown is selected with the TC DISPLAY switch inside the LCD door.

CONTROLS, INDICATORS AND CONNECTORS

STATUS 1 Screen

•STATUS 1

In addition to the information on the STATUS 0 screen, this screen displays the following items.

No.	Item	Contents
1	VIDEO FORMAT display	Displays the currently selected video format.
		Allows you to select the REC item on the VIDEO FORMAT menu screen. X See page 62.
		You can switch this display ON/OFF using the FORMAT item on the LCD/VF [2/3] menu screen.
		X See page 72.

2Time Code (TC)/User’s Bits Indicates the time code (h:m:s:frame) or user’s bits data.

(UB) indication

3 Remaining tape indication	Remaining tape indication (displayed in 1-minute steps)
	This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
	Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF [2/3] menu screen.
	X See page 72.
	* When inserting a brand-new tape, the remaining tape time is not indicated.
	When the tape has been run, the indication will appear.
	* The remaining tape indication is to be regarded only as a guide.
	* When the unit is used at low temperatures, it may take a while before the indication of the remaining tape
	time appears.

4 Voltage indication

		CONTROLS, INDICATORS AND CONNECTORS


No.	Item				Contents
5	Audio sampling frequency in-	32 K : Indicated when the AUDIO MODE item on the AUDIO/MIC menu screen is set to 32 K. (Audio is
	dication	recorded with 12-bit, 32 kHz sampling.)
		48 K : Indicated when the AUDIO MODE item on the AUDIO/MIC menu screen is set to 48 K. (Audio is
		recorded with 16-bit, 48 kHz sampling.)
		X See page 70.
6	Audio level meter indication	Displays the CH-1, CH-2 audio level meters.
		Whether or not to display this item is set with the AUDIO item on the LCD/VF [2/3] menu.
		X See page 72.
7	Standard audio level indication	The level at which audio is recorded on the tape is indicated by “O”.
		–20 dB, –12 dB
		X See “AUDIO REF.LEVEL” on page 70.
		–20 dB				–12 dB
			O	O
		CH-1 O O O O O • • • +
		CH-2 O O O O O • • • +

8	Iris indicator display	M: Iris set higher than normal
		b: Iris set to normal
		N: Iris set lower than normal
9	Iris F-value indication	Indicates the F-number of the connected lens.
		OPEN, F2, F2.8, F4, F5.6, F8, F11, F16, CLOSE
		It is not displayed when the lens is removed. For some lenses, no display appears.
		The indication can be switched ON/OFF with the F.NO/IRIS IND. item on the LCD/VF [1/3] menu screen.
		X See page 71.
0	Filter position indication	Indicates the current filter position.
		No display: FILTER OFF
		ND1: FILTER ND1 (1/4ND)
		ND2: FILTER ND2 (1/16ND)
		The indication can be switched ON/OFF with the FILTER item on the LCD/VF [1/3] menu screen.
		X See page 71.

ND1: FILTER ND1 (1/4ND)