JVC GY-HD101 manual Setting and Displaying the Date and Time, „ Setting the Date and Time

PREPARATIONS FOR OPERATION

PREPARATIONS FOR OPERATION

Setting and Displaying the Date and Time

1.

TIME/DATE menu screen

„ Setting the Date and Time

1. Display the CLOCK ADJUST menu screen.

3.

SHUTTER dial	USER 1		USER 2	USER 3
			SHUTTER
	ND FILTER
	2
	1	MENU
	OFF
			STATUS
2.	WHT.BAL AUTO			AUTO
STATUS button				AUDIO
			CH-1	LEVEL CH-2
	ON		OFF
	POWER			REC
4.	1. POWER switch
	TC/UB/CLOCK menu screen

The date and time of the built-in clock should be set. Powered by the built-in backup battery the set date and time data con- tinue to count even when the power is switched off.

•The set date and time data are displayed on the LCD mon- itor or in the viewfinder and recorded on the tape in accor- dance with the settings made on the menu screen.

„Setting the Date and Time Style

The date and time are set on the menu screen.

When setting while observing on a monitor connected to the connector, set the OUTPUT CHAR. item on the OTHERS [1/2] menu screen to ON.

1. Set the POWER switch to ON.

2. Press the STATUS button for 1 second or longer to dis-

play the TOP MENU screen.

3. Rotate the SHUTTER dial to align the cursor (K) with the

TC/UB/CLOCK item, and then press the SHUTTER dial in

the direction of the camera body.

• The TC/UB/CLOCK menu screen appears.

4. Rotate the SHUTTER dial to align the cursor (K) with the

TIME/DATE item, and then press the SHUTTER dial.

• The TIME/DATE menu screen appears.

• Set the DISPLAY item on the TIME/DATE menu screen

to ON.

5. Make settings on the TIME/DATE menu screen. (This

2.

Date

CLOCK ADJUST menu screen

Select the CLOCK ADJUST item on the TIME/DATE menu screen.

2. Set the date and time.

The blinking digit is the one to be set.

1When the SHUTTER dial is pressed, the blinking digit moves to the next digit.

2When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value becomes smaller.

3Repeat the procedure described in 1 and 2 above to set the day, month, year, hours, minutes.

The digits indicating seconds cannot be set.

4Press the SHUTTER dial in sync with a time signal to enter the date and time precisely.

3. When all the settings are completed, rotate the SHUTTER dial to align the cursor with the PAGE BACK item, and then press the SHUTTER dial.

• The TIME/DATE menu screen returns.

4. To return to the normal screen, use either of the following methods.

Press the STATUS button or

Return to the TOP MENU screen and then select the EXIT item on the TOP MENU screen before pressing the SHUTTER dial.

„Displaying the Time and Date on the Screen

includes display style, etc.)

DATE STYLE	: Selects the style for displaying the date.
	YY/MM/DD (Year, month, day)
	MM/DD/YY (Month, day, year)
	DD/MM/YY (Day, month, year)
TIME STYLE	: The time can be set to display as a 12-
	hour or 24-hour clock system.
SEC DISPLAY	: To select whether or not indication of
	seconds should be displayed on the

Time (Hour:Min)

Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DATE menu screen.

1.Display the TIME/DATE menu screen.

1Select the TC/UB/CLOCK item on the TOP MENU screen.

2Select the TIME/DATE item on the TC/UB/CLOCK menu screen.

2.Set the TIME/DATE menu screen.

5. TIME/DATE menu screen

screen.

TIME SHIFT : Adds time to the built-in clock (time

compensation) and displays it. The

adjusted time is also recorded on the

tape.

1Rotate the SHUTTER dial to align the cursor (K) with the item to be set, and then press the SHUTTER dial.

• The setting area of the selected item starts blinking.

2Rotate the SHUTTER dial to change the setting, and then press the SHUTTER dial.

•The setting area stops blinking and the setting is entered.

MEMO

The TIME STYLE, SEC DISPLAY, DATE STYLE and TIME SHIFT items can also be set and changed after the date and time have been set.

		• DISPLAY item	: Sets whether or not date and time
			should be displayed.
			Set to ON to display the indications.
		• DISPLAY MODE : Sets the video output mode in
		item	which date and time should be dis-
			played.
		BARS	: Displayed when outputting the color
			bar.
		CAM	: Displayed when outputting the color
Date	Time		camera image.
		BARS+CAM	: Date and time are always displayed.
		• DISPLAY STYLE : Sets the style in which the date and
		item	time are displayed.
		DATE+TIME	: Date and time are displayed.
		DATE	: Date only is displayed.
		TIME	: Time only is displayed.

„Display of date and time in the various operation modes.

In Camera mode	: The date and time of the internal
	clock are displayed.
In VTR playback mode	: The date and time recorded on the
	tape are displayed.
In VTR stop mode	: The last read date and time values
	are displayed.

When an HDV/DV sig- : Displays		the date and time of the
nal is input from the	HDV/DV	input. (GY-HD100U/GY-
IEEE1394 connector	HD101E only)

36 37