JVC GZ-MG50AA, GZ-MG20AS Battery indicator, Lock position.
pg, Attempt still image playback

				REFERENCES EN 55
		Warning Indications		CHECK CARD’S WRITE PROTECTION
				SWITCH
				Appears when you attempt recording when the
The following indications appear on the screen.
				write protection tab on the SD card is set to the
		(Battery indicator)		“LOCK” position. ( pg. 20)
Displays the battery remaining power.				NO VIDEO FILES STORED!
Remaining power level				Appears if there are no video files when you
				attempt video playback.
High			Exhausted	NO IMAGE FILES STORED!
● As the battery power comes close to nil, the				Appears if there are no still image files when you
	battery indicator blinks. When the battery power			attempt still image playback.
	is exhausted, power turns off automatically.			CLOSE COVER

SET DATE/TIME!

●Appears when the date/time is not set. (
pg. 18)

●Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased. (
pg. 18)

LENS CAP

Appears for 5 seconds after power is turned on with the power switch set to , if the lens cap is attached or when it is dark.

PLEASE INSERT MEMORY CARD!

Appears when no SD card is inserted in the SD slot. (
pg. 20)

HARD DISK DRIVE IS NOT FORMATTED Appears when the built-in hard disk needs to be formatted.

THIS CARD IS NOT FORMATTED Appears when an unformatted SD card is inserted.

HARD DISK DRIVE IS FULL

Appears when the built-in hard disk is full and recording is not possible.

MEMORY IS FULL

Appears when the SD card is full and recording is not possible.

HDD ERROR!

MEMORY CARD ERROR!

Appears when some errors occured with the recording media.

●Remove the card once and insert it again. If the error is not cancelled, replace the card with one that has been guaranteed for correct operation. (
pg. 20, 62)

●Perform clean up to restore the capacity of the recording media. (
pg. 40)

●It is recommended to run check disk regularly on the PC, on condition that there is no data on the hard disk of the camera.

Appears when the SD card cover is opened during file copy/move operation. (
pg. 41)

NO MEMORY CARD

Appears when the SD card is not inserted to the SD slot for file copy/move operation. (
pg. 41)

NO SUPPORTED FILES

Appears when there is no JPEG (still image) files to be copied or moved in recording media. (
pg. 41)

NUMBER OF FOLDERS OVERFLOW Appears when the number of folders exceeds the limit for file copy/move operation.

MEMORY CARD ERROR! REINSERT CARD OR CHANGE CARD.

Appears when the camera does not recognise the loaded SD card. Remove the card once and insert it again or replace with another card.

(
pg. 20)

FILE SYSTEM MAY HAVE PROBLEM. FORMAT IS RECOMMENDED AFTER COPYING WANTED DATA.

The file system of the recording medium may have a problem. It is recommended to copy the data for backup, then format the medium.

(
pg. 20)

VIDEO MANAGEMENT FILE IS BROKEN. TO RECORD/PLAYBACK VIDEO, RECOVERY IS REQUIRED. RECOVER?

The video management file is broken. Recovery is required to record or play back video files. Press / to select [YES], then press 49 to recover the video management file. If the desired video file is not displayed on the video index screen in spite of the file recovery, the file is moved to the [EXTMOV] folder. Press the recording start/stop button on the index screen to display [MPG], and then select the desired file.

REFERENCES

CONTINUED ON NEXT PAGE