JVC GZ-MG20AA, GZ-MG20AS manual Printer, Direct Printing with a PictBridge, To cancel print setting

	MANAGING FILES EN 47
Direct Printing with a PictBridge	To cancel print setting
	Press / to select [CANCEL], then press
Printer	49.

If your printer is compatible with PictBridge, still images can be printed easily by connecting the camera with the USB cable directly to the printer. DPOF setting can also be used.

(
pg. 46)

To stop printing after printing starts

1 Press 49. The confirmation screen appears.

2 Press / to select [EXECUTE], then press 49.

To print using the DPOF setting

NOTE:	If the printer is compatible with DPOF, you can
After selecting [DIRECT PRINT] in the menu,	use the DPOF setting. ( pg. 46)
connect the USB cable.	1 Set the power switch to .
To print by selecting a still image	2 Set the MODE switch to .
1 Set the power switch to .	3 Press MENU. The menu screen appears.
2 Set the MODE switch to .	4 Press / to select [DIRECT PRINT], then
3 Press MENU. The menu screen appears.	press 49. A message [PLEASE CONNECT
4 Press / to select [DIRECT PRINT], then	PRINTER] appears.
	5 Connect the camera to the printer with the
press 49. A message [PLEASE CONNECT
PRINTER] appears.	USB cable.

5 Connect the camera to the printer with the USB cable.

●After a while, the print menu appears.

6 Press / to select [SELECTED PRINT], then press 49.

7 Press / to select the desired file, then press 49.

●After a while, the print menu appears.

6 Press / to select [DPOF PRINT], then press 49.

7 Press / to select [PRINT], then press

49. The images are printed.

● To confirm the DPOF setting, press / to

select [CHECK SETTINGS], then press 49.

After that, press MENU to return to the previous

8 Press / to set the number of prints.

●The number of prints can be set from 1 to 99.

9 Press / to select [DATE], then press / to select [ON] or [OFF].

NUMBER OF PRINTS 01

DATE OFF

PRINT

CANCEL

menu.

NOTE:

If the printer is not recognised, or to print again after direct printing with a PictBridge printer, remove the USB cable, select [DIRECT PRINT] in the menu again, and then reconnect the cable.

●Select [ON] to print the date or [OFF] not to print.

10 Press / to select [PRINT], then press 49. The image is printed.

ADVANCED OPERATIONS