M6E3Asia.book Page 55 Thursday, June 1, 2006 4:51 PM
Common Menus for All Modes
| Menus | Settings ([ ] = | |
| BASIC SETTING | Press 49 and then select sub menus. | |
| PRESET | EXECUTE: Performs this function. | |
Returns all the camera settings | [CANCEL]: Returns to the menu screen without | ||
to their default values. | executing reset. | ||
| DEMO MODE | OFF: Disables the function. | |
Introduces special features of | [ON]: Activates the function. | ||
the camera at the following | NOTES: | ||
cases. | |||
● The demonstration only works when the DC cord is | |||
● When the menu screen is | |||
connected, not with the battery. | |||
| closed. | ||
| ● If an SD card is in the camera, demonstration will not | ||
● When there is no operation for | |||
take place even if this mode is set to [ON]. | |||
| about 3 minutes after the power | ||
|
| ||
| switch is set to . |
| |
| OPERATION SOUND | OFF: Turns off the operation sound. | |
| |||
Enables you to set the operation | BEEP: The beep sounds when the power is turned on | ||
sound or turn the operation | or off, and at the beginning and end of recording. | ||
sound on/off. | [MELODY]: Instead of a beep, a melody sounds when | ||
|
| any operation is performed. | |
| REMOTE | OFF: The camera does not receive the signal from the | |
Turns reception of the operation | remote control. | ||
signal from the remote control | [ON]: Enables operation with the remote control. | ||
on/off. |
|
EN 55
–
–
–
–
–
DROP DETECTION Setting this function helps prevent damage to the HDD by enabling the camera to turn off the power automatically when, for example, it detects that it has been dropped.
OFF: Disables the function.
[ON]: Activates the function.
To turn the unit on when the drop detection worked, set the power switch to OFF, and to on again.
CAUTION:
Setting this function to off increases the chances of damaging the
–
MENU SETTINGS