M6E3Asia.book Page 19 Thursday, June 1, 2006 4:51 PM
EN
19
NOTES:
● By default, the camera is set to record videos in | ||
4:3 size. To record videos in 16:9 size, see | ||
“Changing the Screen Size” ( pg. 20). | ||
● If the camera is not operated for 5 minutes | ||
while the power is on using the battery pack, it | ||
turns itself off automatically to conserve power. | ||
To turn the camera on again, set the power | ||
switch to OFF, then to | or | . When using |
the AC adapter, the camera enters the sleep | ||
mode (the access lamp lights and the LCD | ||
monitor turns off). To cancel the sleep mode, | ||
perform any operation such as zooming. | ||
● When the camera heats up, the 7REC | ||
Preparation:
●Set the power switch to 
.
●Set the MODE switch to 
.
1
2Select [REGISTER EVENT].
Select
Set
indicator flashes. If the camera continues to |
heat up, shooting may be stopped to protect the |
recording medium. In this case, turn off the |
power, and then wait until the camera cools |
down. |
● If data cannot be recorded or saved properly, |
the video files are not saved to the [SD_VIDEO] |
folder, which is for regular videos. Instead, the |
3 Select [ON/SELECT].
Select
Set
SELECT EVENT
| VACATION |
| 1/3 | |
|
|
| ||
1 | 1 | 1 | 1 | 1 |
1
1
1
1
1
NON SECTION NEXT PAGE
files are saved to the [EXTMOV] folder. To play |
back these files, see “To Play Back Files in the |
[EXTMOV] Folder” ( pg. 31). |
● Video files are given the names |
MOV_001.MOD to MOV_009.MOD, |
MOV_00A.MOD to MOV_00F.MOD, and |
MOV_010.MOD in order of recording. |
● After recording video for 12 consecutive hours, |
recording stops automatically. |
● A new file will be created for every 4 GB of |
continuous shooting. |
● This camera records video in MPEG2 format |
compliant with |
that this camera is not compatible with other |
digital video formats. |
● Before recording important video, be sure to |
make a trial recording. |
● Do not move or shake the camera suddenly |
during recording. If you do so, the sound of the |
hard disk drive may be recorded. |
Registering Files to Events
If you select an event to register the file to before starting recording, the file will be registered to the selected event, thus making the file easy to find at playback. There are up to 3 different destinations within each event (for example: BABY1, BABY2, BABY3).
4 Select the event that you want to register the file to.
Select
Set
●To select a different destination, select [NEXT PAGE].
●To cancel the event registration, select [NON SECTION].
The selected event is displayed on the screen. Press the REC/SNAP button to start recording.
To search by event for a file to play back ( pg. 31)
NOTE:
Once you select to register a file to a certain event, the setting will remain even if you turn the power off. Unless you change the setting, you will register a file to the same event that you had previously selected.