M6E3Asia.book Page 48 Thursday, June 1, 2006 4:51 PM
48 EN Print Setting (Continued)
Direct Printing with PictBridge Printer
If your printer is compatible with PictBridge, still images can be printed easily by connecting the camera directly to the printer with the USB cable. DPOF setting can also be used. ( pg. 47)
To Print by Selecting a Still Image
Preparation:
●Set the power switch to 
.
●Set the MODE switch to 
.
1
REC MEDIA SETTING
DATE/DISPLAY
DPOF
DIRECT PRINT
EFFECT
PROTECT
DELETE
2 Select [DIRECT PRINT].
Select
Set
●[PLEASE CONNECT PRINTER] appears.
3 Connect the camera to the printer with the USB cable.
●After a while, the print menu appears.
SELECTED PRINT
DPOF PRINT
CANCEL
4 Select [SELECTED PRINT].
Select
PRINT THIS IMAGE
Set
SET |
5 Select the desired Image.
Select |
|
| |
Set | NUMBER OF PRINTS |
| |
DATE | OFF | ||
| |||
|
| ||
| CANCEL |
|
6 Press 
/ 
to select menus and press 
/ 
to select settings.
●[NUMBER OF PRINTS]:
The number of prints can be set from 1 to 99.
●[DATE]:
Set whether to print the date and time.
7 Select [PRINT].
Select
Set
To stop printing after printing starts
1)Press 49.
2)Press 
/ 
to select [EXECUTE], then press 49.
NOTE:
If the printer is not recognised, or to print again after direct printing with a PictBridge printer, remove the USB cable, select [DIRECT PRINT] in the menu again, and then reconnect the cable.
To Print Using the DPOF Settings
If the printer is compatible with DPOF, you can use the DPOF settings. ( pg. 47)
After performing step
4 Select and set items as follows. [DPOF PRINT] 
[PRINT]
Select
Set
●To confirm the DPOF setting, press 
/ 
to select [CHECK SETTINGS], then press 49. After that, press MENU to return to the previous menu.