JVC LYT0152-001B manual AE/Effects, Disable P.AE/EFFECT

•The P.AE/Effect Menu disappears and the selected mode is activated. The symbol of the selected mode appears.

Move the pointer and highlight bar to the desired effect by rotating the Select Dial, then press it.

SELECT EFFECT

3 ACCESS P.AE/EFFECT SELECT MENU Press the Select Dial. The P.AE/Effect Menu appears.

4

Select Dial

1 SELECT OPERATION MODE

First turn the Power Dial to “ M ” while pressing down the lock button located on the dial, make sure the viewfinder is pulled out.

2 ACCESSMENU MANUAL MODE ITEM Press the Select Dial and move the pointer and highlight bar to "P.AE/EFFECT" by rotating the Select Dial.

RETURN

Manual Mode Item Menu

EN41

P.AE/Effects

IMPORTANT:

If certain Fades or Wipes (☞ pg. 39, 40) are activated, some P.AE/Effects cannot be used. If you select a P.AE/Effect that is unusable in the current situation, the effect’s symbol begins flashing.

You can choose any one of the effects from the P.AE/Effect Menu.

FOCUS	AUTO
EXPOSURE	AUTO
W. BALANCE	AUTO
FADER	OFF
/ WIPE
4P. AE	OFF
/ EFFECT

Display

P. AE / EFFECT
1	SLOW X4
2	SLOW X10
	OFF
SEL. 41/60	SHUTTER 1/60
1/100	SHUTTER 1/100
1/250	SHUTTER 1/250
1/500	SHUTTER 1/500

P.AE/EFFECT Menu

1/60 PAUSE

The indicator for the selected mode appears, and the selected mode is engaged.

5S
M	OFF
A

Lock button

P	Power Dial
YAL

5 START RECORDING

Press START/STOP. The image begins with the selected effect.

6 DISABLE P.AE/EFFECT

To turn off the selected effect, re-access the P.AE/Effect Menu and move the pointer and highlight bar to “OFF” by rotating the Select Dial. Then press it.

NOTE:

P.AE/Effects can be changed during recording or during Record-Standby.