JVC LYT0152-001B manual Brand Setting, Operate VCR, RM-V712U 9 ` optional

62EN

USINGTHEOPTIONALSTATIONKIT

To perform Random Assemble Editing (☞ pg. 63), the optional VU-V63KITU Station Kit is necessary. It contains the AC Charger Station, the RM-V712U

VCR (Recording deck)remote control, an S-VIDEO cable, a VIDEO/ AUDIO cable and an editing cable.

3

T W

SHIFT MBR SET

12

64 5

RM-V712U

7 8 9 ` (optional)

Brand Setting

Before you can perform Random Assemble Editing (☞ pg. 63 – 65), or control the VCR using the RM-V712U remote control, you must set the VCR brand.

SET REMOTE/VCR CODE

Before operation, make sure the lithium battery is installed in the remote control (☞ pg. 77).

1 SET REMOTE TO OPERATE VCR Turn off the power to the VCR and point the remote towards the VCR’s infrared sensor. Then, referring to the VCR CODE LIST on the left, press and hold MBR SET, and press button

(A) and then (B).

•The code is automatically set once you release the MBR SET button, and the VCR’s power comes on.

VCR CODE LIST

VCR BRAND	BUTTONS
NAME	(A) (B)
GE	1 1￿
	9 2￿
	9 `￿
	9 4
HITACHI	6 6￿
	6 3
JVC A	9 1￿
B	9 6￿
C	9 3
MAGNAVOX	9 5￿
	1 1￿
	7 1￿
	7 6
MITSUBISHI	6 7￿
	6 8
NEC	3 7￿
	3 8
PHILIPS	1 9￿
	9 5￿
	1 1￿
	9 4￿
	9 1￿
	9 6￿
	1 2

VCR BRAND	BUTTONS
NAME		(A) (B)
PHILIPS		3 3￿
		7 2
PANASONIC		1 3￿
		1 7￿
		1 1￿
		9 4￿
		1 8￿
RCA	￿	9 2￿
		9 4￿
		6 6￿
		6 3￿
		9 `
SANYO		3 6￿
		3 5
SHARP		1 5￿
		1 `
SONY		6 5￿
		6 `￿
		3 9￿
		3 1￿
TOSHIBA	￿	6 9￿
		6 1
ZENITH		1 6

2 OPERATE VCR

Make sure the VCR’s power is on. Then, while holding SHIFT, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you don’t need to press SHIFT for this one).

You’re now ready to try Random Assemble Editing.

IMPORTANT

Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.

NOTES:

●If the VCR’s power doesn’t come on in step 1, try another code from the VCR CODE LIST.

●Some brands of VCR don’t come on automati- cally. In this case, turn the power on manually and try step 2.

●If the remote control is not able to control the VCR, use the controls on the VCR.

●When the remote control's battery runs out, the VCR brand you have set will be erased.

In that case, replace the old battery with a new one to reset the VCR brand.