JVC LYT0190-001B Grip Strap Attachment, Attach Grip Strap to Hand Strap Eyelet, Adjust Length

14EN

Grip Strap Attachment

GETTINGSTARTED(Cont.)

Pad
Grip Strap		START/STOP
		Pad
Bottom of
camcorder		3
Length adjuster	Sub hand
	strap eyelet
Hand strap eyelet		1
Loop

2

1 ATTACH GRIP STRAP TO HAND STRAP EYELET

Open the pad and pull the grip strap in the direction of the arrow to remove the grip strap from the pad.

Thread the end of the grip strap through the hand strap eyelet, then thread the other end of the grip through the loop. Pull firmly to ensure secure attachment.

•To use the strap as a hand strap, thread the strap through the length adjuster when attaching it to the camcorder.

2 ATTACH GRIP STRAP TO SUB HAND STRAP EYELET

Open the pad and thread the grip strap through the pad. Next, thread the end of the grip strap through the sub hand strap eyelet.

3 ADJUST LENGTH

Adjust so that your thumb and fingers can easily operate the START/STOP button and the zoom switch 1. Position the pad so that it contacts the back of your hand and thread the grip strap through the length adjuster 2, then re-attach the pad 3.