AFTER
USE
EN
75
Cleaning The Camcorder
Open switch (BATTERY)
Battery cover
Battery pack
Bottom of viewfinder
1 |
Gap |
LCD monitor
2
1 REMOVE POWER SUPPLY
Remove the battery pack or disconnect the AC Charger Station (☞ pg. 8 – 10).
2 CLEAN EXTERIOR Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
3 CLEAN LENS
Blow it with a blower brush, then wipe gently with lens cleaning paper.
4 PULL OUT VIEWFINDER Pull out the viewfinder fully.
5 CLEAN VIEWFINDER
Slide the cover in the direction of the arrow 1. Insert a lens blower or a soft cloth into the gap at the bottom of the viewfinder and clean the interior of the viewfinder with it 2.
6 PUSH VIEWFINDER BACK IN
Slide the cover back to its original position and push the viewfinder back in.
7 OPEN LCD MONITOR Open the LCD monitor fully.
8 CLEAN LCD MONITOR
With soft cloth, gently wipe the LCD monitor in a semicircular pattern. Avoid using too much pressure as this will smear the monitor screen, making it much more difficult to clean.
9 CLOSE LCD MONITOR
NOTES:
●Avoid using strong cleaning agents such as benzine or alcohol. This may damage the unit's body or cause malfunction.
●When using a cleaner or chemically treated cloth refer to the cautions of each product.