JVC LYT0190-001B manual Access Playback Menu, Close Menu

52EN

Playback Menu

PLAYBACK

AdvancedFeatures(Cont.)

The Playback Menu allows you to set the following functions:

Playback Sound (32 kHz, 48 kHz), Synchro Comp, Display and Time Code. The following procedure applies to all except Synchro Comp (☞ pg. 66, 67).

Display

					FULL SOUND
					SOUND2
	48kHz MODE		FULL SOUND		SOUND1
	32kHz MODE		SOUND1
	SYNCHRO		0 . 0			ON
	DISPLAY		ON
	TIMECODE		OFF			OFF
					ON
4					OFF
	END
		Playback Menu
4			FULL SOUND
	48kHz MODE
	32kHz MODE		SOUND1
	SYNCHRO		0 . 0
	DISPLAY		ON
	TIMECODE		OFF
	END			Select Dial

FULL SOUND SOUND2 SOUND1

Power Dial

	M
A	5S
OFF
Y
A
L
P

Lock button

MENU button

1 SELECT OPERATION MODE First turn the Power Dial to “PLAY” while pressing down the lock button located on the dial. Open the LCD monitor fully.

2 ACCESS PLAYBACK MENU

Press MENU. The Playback Menu appears in the LCD monitor and on the connected TV.

3 SELECT FUNCTION

Move the pointer and highlight bar to the desired function by rotating the Select Dial. Press the Select Dial to activate.

4 SET FUNCTION PARAMETERS Rotate the Select Dial to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press the Select Dial, and the pointer and highlight bar automatically move to “END”.

•To set parameters for other functions, repeat steps 3 and 4.

5 CLOSE MENU

Press the Select Dial again, and the menu disappears.