JVC LYT0002-0A1A Loading/Unloading a Cassette, Open Cassette Door, INSERT/REMOVE Tape

Page 13

13

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

OPEN/EJECT switch

Make sure the window side is facing out.

Cassette holder

PUSH HERE

Cassette cover

Erase protection switch

1 OPEN CASSETTE DOOR

Turn on the power, then slide the OPEN/EJECT switch in the direction of the arrow. The cassette cover releases. Open the cover in the direction of the arrow until it locks. The holder opens automatically.

•Before opening the cassette cover, disconnect the headphones and AUDIO/VIDEO connectors from the jacks because the cassette cover will interfere with them.

•Do not touch internal components.

2 INSERT/REMOVE TAPE

Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette cover.

•When the battery's charge is low, you may not be able to close the cover. Do not apply force. Replace the battery with a fully charged one before continuing.

RECORDING TIME

TAPE

RECORDING MODE

 

SP

LP

DVM-30

Approx. 30 min.

Approx. 45 min.

DVM-60

Approx. 60 min.

Approx. 90 min.

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder doesn’t open, close the cassette cover and try again.

●Be careful not to get your fingers caught in the holder when it’s closing. If this happens, the holder will open automatically after a few seconds.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cover.

●Closing the cassette cover before the cassette holder comes out may cause damage to the camcorder.

●When shooting again after already shooting a scene, a blank portion is recorded on the tape or a previously recorded scene is erased (recorded over) if you open the cassette cover, regardless of whether the cassette holder comes out or not. See page 20 for information about recording from the middle of a tape.

** To protect valuable recordings . . .

..... slide the erase protection switch on the back of

the tape in the direction of “SAVE”. This prevents this tape from being recorded over. If you decide later that you do want to record on this tape, slide the switch back to “REC” before loading the tape.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents GR-DVM1 It is recommended that you Dear CustomerConnection to the mains supply in the United Kingdom Some DO’S and DON’TS on the Safe USE of Equipment Safety Precautions Video Area Audio Area Sub-Code AreaITI Insert and Tracking Information Area AUDIO/VIDEO cable Video cable ø Audio cable ø CAM Stand Sun hood Grip Hand strap Battery pack BN-V812UAA-V80EK or AA-V80EA DC cordCD-ROM DV30MEDetach BATTERY/BATTERIES Charging The Battery PackAttach DetachOpen Battery Cover Installing The Battery PackInsert Battery Close Battery CoverSupply Power Using The CAM StandIndoor Use Attach to CAM StandRemove OLD Battery Clock Lithium Battery CR2025 Insertion/RemovalInsert NEW Battery Replace Battery HolderSelect Operation Mode Date/Time SettingsAccess Recording Menu Open LCD MonitorOpen Cassette Door Loading/Unloading a CassetteINSERT/REMOVE Tape To protect valuable recordingsHand Strap Attachment Recording Mode SettingLens Cover Detachment Attach SUN Hood Sun Hood AttachmentOpen SUN Hood Detach SUN HoodGrip Attachment Grip AdjustmentInstalling The Battery Remote Control UnitRE-INSERT Holder Full Auto/Manual Operation Basic Recording Turn on PowerStart Recording END RecordingEngage Still Mode Select ModeRecording From The Middle Of a Tape Start SearchTime Code When blank portion is recorded on a tapeDuring shooting Partway through the tapeGrasp Camcorder Holding The CamcorderBrightness Control Adjust BrightnessJournalistic shooting LCD Monitor IndicationsInterface Shooting Zoom Changing the Snapshot Setting Motor Drive modeSnapshot Take SnapshotRewind Tape Snapshot SearchBegin Search To Stop a Snapshot Search In ProgressTo Take a Snapshot In The 5-Second Mode Press the PUSH-OPENswitch and open the LCD monitor fullyScene To Take a Snapshot In The Self-Timer Mode Self-Timer, press Snapshot instead Select Function MenusClose Recording Menu Press MENU. The Recording Menu appears in the LCD monitorZoom Magnification DIS Digital Image StabilizerSystem Menu Access System MenuClose System Menu END SET Menu Button Sound signals can be sampled at 32 kHz or 48 kHzSelect Effect FADE/WIPE EffectsFades and Wipes Resume Recording Picture Wipe/DissolveDissolve Press Recording START/STOP? R Random Fader Random VariationsExchanging FADE/WIPE Effects Accessmenu FADER/WIPE CustomizeSelect NEW Effect Close MenuFades and Wipes Refer to page 34 on using the exchanged effectsAE/Effects Disable P.AE/EFFECTVideo Echo Sepia √ Monotone √Classic Film √ Twilight √Exchanging P.AE/Effects Accessmenu P.AE/EFFECT CustomizeDisplaying The Date And Time During Recording Select Auto in . Or set the shooting Mode selector to Auto White Balance AdjustmentTo Return To Automatic White Balance Manual White Balance Operation Enter SettingExit Recording Menu To Change The Tint For RecordingAdjust Focus Manual Focus AdjustmentTo Change To Auto Focus Exposure Control Adjust ExposureBrightness control of the LCD monitor To Return To Automatic Exposure ControlIris Iris LockEND Playback Viewing RecordingTo Perform High-Speed Search You can watch what you’ve recorded in the LCD monitorStart Playback VCR/TV ConnectionRecording deck Press 46. You can watch the scenes you recorded on the TVDocking Station Attachment Confirm POWER-OFF StatusAttach and Locks TV Playback Input connectorConnection to an S-VHS Recorder or a TV with aConnect Docking Station to TV or VCR Turn on Power Select TV’S Video ModeConnectinput VCR Output to TV Start Playback Connect as shown in the illustration pgPlayback Menu Access Playback MenuTo set parameters for other functions, repeat steps 3 Press Menu again, and the menu disappearsDisplaying the Date During Playback Playback SoundDisplaying The Time Code During Playback Activate Zoom Playback ZoomLocatescene Portion of Magnified END ZoomPress Play Playback EffectsRM-V708U or WRM-V710U provided Dubbing Docking StationMake Connections Pause RecordingOperate the VCR Brand SettingRM-V708U or RM-V710U 9 ` provided Random Assemble Editing To Operate The VCR With The Remote ControlStart Source Playback if Necessary Execute FADE/WIPE in if NecessarySET EDIT-OUT Point SET EDIT-IN PointUSE Fade Wipe on Scene TRANSI- Tion if Necessary USE P.AE/EFFECT if NecessaryStart Editing Engagemode Vcrs RECORD-PAUSEStop Editing Prepare for R.A. Edit Play Back Dubbed Scene For More Accurate EditingChoose a Scene RM-V708U orPress MENU. The Playback Menu appears on the TV screen Input Correction DataNow perform Random Assemble Editing beginning with on Find EDIT-IN Point Audio DubbingBegin Dubbing Pause During DubbingFind Edit OUT Point Start Recording Insert EditingFind Edit in Point Pause During Editing Prepare for Insert Editing Stop EditingREC pg 5-Second mode Select 5S or 5SDClose the cassettes cover Play pgTR Ouble Shooting Picture Wipe function doesn’t work Squeeze or Cinema mode is selected in the Recording MenuPossible Causes This may occur when Cleaning The Camcorder Main Unit Name & Function LCD Monitor Indications During RecordingLCD Monitor Indications During Playback Jlip Video Capture Docking Station Avoid using the unit For safety, do notTo avoid hazard To prevent damage to the camcorderDo not leave the unit To prolong service lifeTo protect the unit, do not To prevent damage to the LCD monitor, do notPower consumption Format PowerSignal format Video signal recording formatWeight Approx g Power V/1,250mAh DimensionsPower DC 3 V Lithium Battery CR2025 Battery Life Weight Approx g with battery installedAC Adapter Colour temperatureAuto focus On-screen displayAnimation Audio Dubbing Motor Drive ModeConnections Pgs , 50 Play Back on TVPage GR-DVM1

LYT0002-0A1A specifications

The JVC LYT0002-0A1A is a cutting-edge camera accessory designed specifically for enhancing video and imaging capabilities. Aimed at both amateur and professional videographers, this product incorporates various advanced features and technologies to facilitate exceptional video capture and improved functionality.

One of the key features of the LYT0002-0A1A is its high compatibility with a range of JVC camcorders. This ensures seamless integration and allows users to leverage its full potential without needing extensive adjustments or additional equipment. The accessory is built with precision, enhancing the overall filming experience by providing stability and versatility.

Another significant characteristic of the LYT0002-0A1A is its lightweight and compact design. Weighing in at just a few ounces, it allows for easy transport and setup, ensuring that users can take it anywhere without the hassle of heavy equipment. This makes it ideal for on-the-go filming, whether for professional projects or personal content creation.

In terms of technology, the LYT0002-0A1A boasts impressive stabilization capabilities. The in-built stabilization technology minimizes shake and vibrations, resulting in smoother footage even in challenging shooting conditions. This feature is especially beneficial for action shots or outdoor filming where movement is unavoidable.

The user-friendly interface of the LYT0002-0A1A should not be overlooked. Designed with the end-user in mind, it incorporates intuitive controls that provide quick access to essential functions, making it suitable for beginners and experienced users alike. This simplicity enhances the overall user experience, allowing for more focus on creativity rather than on technical adjustments.

Additionally, the LYT0002-0A1A supports high-resolution video recording, which is crucial for producing high-quality content. Its ability to capture sharp, detailed images ensures that users can produce professional-grade videos that stand out in an increasingly competitive digital landscape.

Overall, the JVC LYT0002-0A1A is a remarkable camera accessory that combines cutting-edge technology with user-friendly design. Its main features, including compatibility with JVC camcorders, lightweight construction, advanced stabilization, and high-resolution recording, make it an essential tool for anyone serious about videography. This accessory not only enhances video quality but also simplifies the filming process, allowing users to focus on their creativity and storytelling.
Top Page Image Contents