JVC LYT0002-0A1A To avoid hazard, To prevent damage to the camcorder, During use, Store cassettes

Page 77

CAUTIONS

Battery Packs

The supplied battery pack is a

 

lithium-ion battery. Before

 

using the supplied battery pack

 

or an optional battery pack, be

 

sure to read the following

Terminals

cautions:

 

1.To avoid hazard . . .

.... do not burn.

.... do not short-circuit the terminals.

.... do not modify or disassemble.

.... do not expose the battery to temperatures exceeding 60°C, as this may cause the battery to overheat, explode or catch fire.

.... use only specified chargers.

2.To prevent damage and prolong service life . . .

.... do not subject to unnecessary shock.

.... charge in an environment where tempera- tures are within the tolerances shown in the chart below. This is a chemical reaction type battery—cooler temperatures impede chemical reaction, while warmer tempera- tures can prevent complete charging.

.... store in a cool, dry place. Extended exposure

to high temperatures will increase natural discharge and shorten service life.

.... avoid prolonged uncharged storage.

.... remove from charger or powered unit when not in use, as some machines use current even when switched off.

3.To prevent damage to the camcorder . . .

.... replace the battery pack when it begins to deliver less recording time per charge.

NOTE:

It is normal for the battery pack to be warm after charging, or after use.

Temperature Range Specifications

Charging

10°C to 35°C

Operation

10°C to 40°C

Storage

–10°C to 30°C

NOTES:

●Recharging time is based on room temperature of 20°C.

●The lower the temperature, the longer recharging takes.

77

Cassettes

To properly use and store your cassettes, be sure to read the following cautions:

1.During use . . .

.... make sure the cassette bears the Mini DV mark.

.... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals.

.... make sure the cassette is positioned properly when inserting.

.... do not load and unload the cassette repeatedly without allowing the tape to run at all. This slackens the tape and can result in damage.

.... do not open the front tape cover. This exposes the tape to fingerprints and dust.

2.Store cassettes . . .

.... away from heaters or other heat sources.

.... out of direct sunlight.

.... where they won’t be subject to unnecessary shock or vibration.

.... where they won’t be exposed to strong magnetic fields (such as those generated by motors, transformers or magnets).

.... vertically, in their original cases.

Main Unit

1.For safety, DO NOT . . .

.... open the camcorder’s chassis.

.... disassemble or modify the unit.

.... short-circuit the terminals of the battery pack. Keep it away from metallic objects when not in use.

.... allow inflammables, water or metallic objects to enter the unit.

.... remove the battery pack or disconnect the power supply while the power is on.

.... leave the battery pack attached when the camcorder is not in use.

2.Avoid using the unit . . .

.... in places subject to excessive humidity or dust.

.... in places subject to soot or steam such as near a cooking stove.

.... in places subject to excessive shock or vibration.

.... near a television set.

.... near appliances generating strong magnetic

or electric fields (speakers, broadcasting antennas, etc.).

.... in places subject to extremely high (over 40°C or 104°F) or extremely low (under 0°C or 32°F) temperatures.

CONTINUED ON NEXT PAGE

Page 76 Page 78
Image 77
Page 76 Page 78
Contents GR-DVM1 Connection to the mains supply in the United Kingdom Dear CustomerIt is recommended that you Some DO’S and DON’TS on the Safe USE of Equipment Safety Precautions ITI Insert and Tracking Information Area Sub-Code AreaVideo Area Audio Area AUDIO/VIDEO cable Video cable ø Audio cable ø CAM Stand Sun hood Grip Hand strap Battery pack BN-V812UAA-V80EK or AA-V80EA DC cordCD-ROM DV30MEDetach BATTERY/BATTERIES Charging The Battery PackAttach DetachOpen Battery Cover Installing The Battery PackInsert Battery Close Battery CoverSupply Power Using The CAM StandIndoor Use Attach to CAM StandRemove OLD Battery Clock Lithium Battery CR2025 Insertion/RemovalInsert NEW Battery Replace Battery HolderSelect Operation Mode Date/Time SettingsAccess Recording Menu Open LCD MonitorOpen Cassette Door Loading/Unloading a CassetteINSERT/REMOVE Tape To protect valuable recordingsLens Cover Detachment Recording Mode SettingHand Strap Attachment Attach SUN Hood Sun Hood AttachmentOpen SUN Hood Detach SUN HoodGrip Attachment Grip AdjustmentRE-INSERT Holder Remote Control UnitInstalling The Battery Full Auto/Manual Operation Basic Recording Turn on PowerStart Recording END RecordingEngage Still Mode Select ModeRecording From The Middle Of a Tape Start SearchTime Code When blank portion is recorded on a tapeDuring shooting Partway through the tapeGrasp Camcorder Holding The CamcorderBrightness Control Adjust BrightnessJournalistic shooting LCD Monitor IndicationsInterface Shooting Zoom Changing the Snapshot Setting Motor Drive modeSnapshot Take SnapshotRewind Tape Snapshot SearchBegin Search To Stop a Snapshot Search In ProgressScene Press the PUSH-OPENswitch and open the LCD monitor fullyTo Take a Snapshot In The 5-Second Mode , press Snapshot instead Self-TimerTo Take a Snapshot In The Self-Timer Mode Select Function MenusClose Recording Menu Press MENU. The Recording Menu appears in the LCD monitorZoom Magnification DIS Digital Image StabilizerClose System Menu Access System MenuSystem Menu END SET Menu Button Sound signals can be sampled at 32 kHz or 48 kHzSelect Effect FADE/WIPE EffectsFades and Wipes Resume Recording Picture Wipe/DissolveDissolve Press Recording START/STOP? R Random Fader Random VariationsExchanging FADE/WIPE Effects Accessmenu FADER/WIPE CustomizeSelect NEW Effect Close MenuFades and Wipes Refer to page 34 on using the exchanged effectsAE/Effects Disable P.AE/EFFECTVideo Echo Sepia √ Monotone √Classic Film √ Twilight √Exchanging P.AE/Effects Accessmenu P.AE/EFFECT CustomizeDisplaying The Date And Time During Recording To Return To Automatic White Balance White Balance AdjustmentSelect Auto in . Or set the shooting Mode selector to Auto Manual White Balance Operation Enter SettingExit Recording Menu To Change The Tint For RecordingTo Change To Auto Focus Manual Focus AdjustmentAdjust Focus Exposure Control Adjust ExposureBrightness control of the LCD monitor To Return To Automatic Exposure ControlIris Iris LockEND Playback Viewing RecordingTo Perform High-Speed Search You can watch what you’ve recorded in the LCD monitorStart Playback VCR/TV ConnectionRecording deck Press 46. You can watch the scenes you recorded on the TVAttach and Locks Confirm POWER-OFF StatusDocking Station Attachment TV Playback Input connectorConnection to an S-VHS Recorder or a TV with aConnect Docking Station to TV or VCR Turn on Power Select TV’S Video ModeConnectinput VCR Output to TV Start Playback Connect as shown in the illustration pgPlayback Menu Access Playback MenuTo set parameters for other functions, repeat steps 3 Press Menu again, and the menu disappearsDisplaying The Time Code During Playback Playback SoundDisplaying the Date During Playback Activate Zoom Playback ZoomLocatescene Portion of Magnified END ZoomRM-V708U or WRM-V710U provided Playback EffectsPress Play Dubbing Docking StationMake Connections Pause RecordingRM-V708U or RM-V710U 9 ` provided Brand SettingOperate the VCR Random Assemble Editing To Operate The VCR With The Remote ControlStart Source Playback if Necessary Execute FADE/WIPE in if NecessarySET EDIT-OUT Point SET EDIT-IN PointUSE Fade Wipe on Scene TRANSI- Tion if Necessary USE P.AE/EFFECT if NecessaryStop Editing Engagemode Vcrs RECORD-PAUSEStart Editing Prepare for R.A. Edit Play Back Dubbed Scene For More Accurate EditingChoose a Scene RM-V708U orNow perform Random Assemble Editing beginning with on Input Correction DataPress MENU. The Playback Menu appears on the TV screen Find EDIT-IN Point Audio DubbingBegin Dubbing Pause During DubbingFind Edit OUT Point Start Recording Insert EditingFind Edit in Point Pause During Editing Prepare for Insert Editing Stop EditingREC pg 5-Second mode Select 5S or 5SDClose the cassettes cover Play pgTR Ouble Shooting Picture Wipe function doesn’t work Squeeze or Cinema mode is selected in the Recording MenuPossible Causes This may occur when Cleaning The Camcorder Main Unit Name & Function LCD Monitor Indications During RecordingLCD Monitor Indications During Playback Jlip Video Capture Docking Station Avoid using the unit For safety, do notTo avoid hazard To prevent damage to the camcorderDo not leave the unit To prolong service lifeTo protect the unit, do not To prevent damage to the LCD monitor, do notPower consumption Format PowerSignal format Video signal recording formatWeight Approx g Power V/1,250mAh DimensionsPower DC 3 V Lithium Battery CR2025 Battery Life Weight Approx g with battery installedAC Adapter Colour temperatureAuto focus On-screen displayAnimation Audio Dubbing Motor Drive ModeConnections Pgs , 50 Play Back on TVPage GR-DVM1

LYT0002-0A1A specifications

The JVC LYT0002-0A1A is a cutting-edge camera accessory designed specifically for enhancing video and imaging capabilities. Aimed at both amateur and professional videographers, this product incorporates various advanced features and technologies to facilitate exceptional video capture and improved functionality.

One of the key features of the LYT0002-0A1A is its high compatibility with a range of JVC camcorders. This ensures seamless integration and allows users to leverage its full potential without needing extensive adjustments or additional equipment. The accessory is built with precision, enhancing the overall filming experience by providing stability and versatility.

Another significant characteristic of the LYT0002-0A1A is its lightweight and compact design. Weighing in at just a few ounces, it allows for easy transport and setup, ensuring that users can take it anywhere without the hassle of heavy equipment. This makes it ideal for on-the-go filming, whether for professional projects or personal content creation.

In terms of technology, the LYT0002-0A1A boasts impressive stabilization capabilities. The in-built stabilization technology minimizes shake and vibrations, resulting in smoother footage even in challenging shooting conditions. This feature is especially beneficial for action shots or outdoor filming where movement is unavoidable.

The user-friendly interface of the LYT0002-0A1A should not be overlooked. Designed with the end-user in mind, it incorporates intuitive controls that provide quick access to essential functions, making it suitable for beginners and experienced users alike. This simplicity enhances the overall user experience, allowing for more focus on creativity rather than on technical adjustments.

Additionally, the LYT0002-0A1A supports high-resolution video recording, which is crucial for producing high-quality content. Its ability to capture sharp, detailed images ensures that users can produce professional-grade videos that stand out in an increasingly competitive digital landscape.

Overall, the JVC LYT0002-0A1A is a remarkable camera accessory that combines cutting-edge technology with user-friendly design. Its main features, including compatibility with JVC camcorders, lightweight construction, advanced stabilization, and high-resolution recording, make it an essential tool for anyone serious about videography. This accessory not only enhances video quality but also simplifies the filming process, allowing users to focus on their creativity and storytelling.
Top Page Image Contents