JVC LYT0002-0N4B specifications Recording Mode Setting, SET Tape Length, SET Recording Mode

10EN	GETTING STARTED (cont.)
T30•45•60 tape length select button	Tape Length Setting

SP-LP recording mode button

Set POWER to “CAMERA”.

Tape length indicator

Set the tape length according to the length of the tape used.

SET TAPE LENGTH

1 Press T30•45•60 until the required indication appears in the LCD monitor or the veiwfinder. T30 = 30 minutes of recording time, T45 = 45 minutes, and T60 = 60 minutes (in SP).

NOTE:

The tape remaining time (☞ pg. 15) displayed in the LCD monitor or the viewfinder is correct only if the correct tape length has been selected.

Recording Mode Setting

Set depending on your preference.

SET RECORDING MODE

1 Press SP•LP button. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “LP” (Long Play) is more economi- cal, providing twice the recording time.

T30 T30 T45 T60

LCD monitor or viewfinder

Recording mode indicator

NOTE:

If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

SPSPLP