Random Assemble Editing R.A.Edit, Connect to

Random Assemble Editing [R.A.Edit]

Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the MBR (Multi-Brand Remote, RM-V704U or RM-V700U) is set to operate with your brand of VCR (see VCR CODE LIST), but can also be performed by operating the VCR manually.

				MBR SET
1	2	3		VCR CTL
4	5	6		MBR:
				MBR:
7	8	9	0	RM-V704U or
				RM-V700U (provided)

VCR CODE LIST

EN 37

SET REMOTE/VCR CODE

Before operation, make sure the lithium battery is installed in the remote control RM-V704U or RM-V700U (☞ pg. 40).

SET REMOTE TO OPERATE VCR

1 Turn off the power to the VCR and point the remote toward the VCR’s infrared sensor. Then, referring to the VCR CODE LIST on the left, press and hold MBR SET, and press button (A) and then (B).

•The code is automatically set once you release the MBR SET button, and the VCR’s power comes on.

OPERATE THE VCR

2 Make sure the VCR’s power is on. Then, while holding VCR CTL, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you don’t need to press VCR CTL for this one).

You’re now ready to try Random Assemble Editing.

IMPORTANT

Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.

VCR BRAND	BUTTONS
NAME	(A) (B)
AKAI	6 2
	6 4
	7 7
BLAUPUNKT	1 3
FERGUSON	9 7
	9 8
	3 2
GRUNDIG	1 4
	3 4
HITACHI	6 6
	6 3
JVC A	9 1
B	9 6
C	9 3
MITSUBISHI	6 7
	6 8
NEC	3 7
	3 8
PANASONIC	1 3
	1 7
	1 1
	9 4
	1 8

VCR BRAND	BUTTONS
NAME	(A) (B)
PHILIPS	1 9
	9 5
	1 1
	9 4
	9 1
	9 6
	1 2
	3 3
SANYO	3 6
	3 5
SELECO,	9 1
REX	9 6
SHARP	1 5
	1 `
SONY	6 5
	6 `
	3 9
	3 1
THOMSON,	9 1
TELEFUNKEN,	9 6
SABA,	9 7
NORDMENDE	3 2
TOSHIBA	6 9
	6 1

NOTES:

●If the VCR’s power doesn’t come on in step 1, try another code from the chart.

●Some brands of VCR don’t come on automatically. In this case, turn the power on manually and try step 2.

●If the MBR is not able to control the VCR, use the controls on the VCR.

MAKE CONNECTIONS

CONNECT TO . . .

1 A JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

Connect the editing cable to the Remote PAUSE terminal.

BJVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR

Connect the editing cable to the R.A.EDIT connector.

CVCR OTHER THAN TYPE A OR B

Connect the editing cable to the MBR's Pause-In jack.

All other connections are as shown in the illustration on page 38.

CONTINUED ON NEXT PAGE