16
RECORDING BasicFeatures(cont.)
START/STOP
VISS
(provided with
RETAKE
AUTO PAUSE
Normal | Upside down |
RecordRecord-Standby
FEATURE: | Index Code Marking |
PURPOSE: | To give you automatic access to any |
| selected point on a recording. Auto |
| Marking and Manual Marking are |
| available. |
OPERATION: | Auto Marking |
| An index code is marked to start the |
| first recording after a cassette is |
| inserted, as long as the Power switch |
| is set to “CAMERA”. |
| Manual Marking |
| 1) Press VISS once to place the index |
| code. INDEX blinks in the |
| viewfinder during marking. |
NOTE: | If VISS is pressed during |
| |
| placed where RECORDING |
| START/STOP is pressed. |
|
|
FEATURE: | Retake |
PURPOSE: | To |
OPERATION: | 1) Make sure the camcorder is in the |
| |
| 2) Press either RETAKE button to |
| reach the start point for new |
| recording. |
| 3) Press RECORDING START/STOP |
NOTE: | to start recording. |
Noise may appear during Retake. | |
| This is normal. |
|
|
FEATURE: | Auto Pause System |
PURPOSE: | To automatically stop recording |
| when the camcorder is pointed |
| down, preventing accidental |
| recordings of the ground, your feet, |
| etc. |
OPERATION: | 1) Set AUTO PAUSE to “ON”. When |
| the camcorder is tilted down by a |
| large degree from its horizontal |
| position during recording, the |
| |
| automatically engaged. “AUTO |
| PAUSE” appears in the viewfinder. |
NOTES: | ● The Auto Pause System is also |
| effective when the camcorder is |
| pointed up, or is positioned upside |
| down. |
| ● Auto Pause also works when the |
| camcorder is twisted by a large |
| degree to the left or right. |
| ● When you want to shoot in any of |
| the aforementioned positions, |
| make sure you set AUTO PAUSE to |
| “OFF”. |
|
|