JVC GR-AX660 Connection To a VCR a, Editing, Dubbing and Playback, Connectors B Playback only

PLAYBACK Basic Connections 35

		There are three basic types of connections. When making
		the connections, refer also to your VCR and TV
		instruction manuals.
		Connection To A VCR [A]
		(Editing, Dubbing and Playback)
		NOTE:
		Use the optional Audio and Video cables.
To AUDIO	Audio and Video		CONNECT CAMCORDER TO VCR
and VIDEO			As shown in the illustration at left, connect the
connectors	cables (optional)	1 optional Audio and Video cables between the
A	B		AUDIO and VIDEO connectors on the camcorder
			and those on the VCR.
If your TV/VCR	To AUDIO	2	SUPPLY POWER
has the SCART	and		Turn on the camcorder, the VCR and the TV.
	VIDEO IN
connector, use
the provided	connectors		SELECT MODE
cable adapter.
			Set the VCR to its AUX input mode, and set the TV
		3 to its VIDEO mode.
VCR
		Connection To A TV With A/V Input
Aerial		Connectors [B] (Playback ONLY)
		NOTE:
		Use the optional Audio and Video cables.

RF unit RF-V5E(optional)

To AUDIO, VIDEO and DC OUT connectors

CONNECT CAMCORDER TO TV

1 As shown in the illustration at left, connect the optional Audio and Video cables between the AUDIO and VIDEO connectors on the camcorder and those on the TV.

SELECT MODE

2 Set the TV to its VIDEO or AV mode (as specified in its instructions).

NOTES:

●It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack.

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s power switch to CAMERA, then set your TV to the appropriate input mode.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

Connection To A TV With NO A/V Input Connectors (Playback ONLY)

NOTE:

Use the optional RF-V5E RF unit.

*Refer to the RF-V5E instruction manual for connection procedure.