JVC GR D 240 manual Tele Macro, Wide Mode, Wind CUT, OFF Disengages the function

Page 24

MasterPage: Left GR-D240PAL.book Page 24 Wednesday, November 17, 2004 7:32 PM

24 EN MENUS FOR DETAILED ADJUSTMENT

MANUAL

The “q MANUAL” settings are effective only when the Power Switch is set to “M”.

[ ] = Factory-preset

DIS

OFF: Disables the function.

[ON ]: To compensate for unstable images caused by camera-shake, particularly at high magnification.

NOTES:

Accurate stabilisation may not be possible if hand shake is excessive, or depending on the shooting condition.

The “ ” indicator blinks or goes out if the Stabiliser cannot be used.

Switch off this mode when recording with the camcorder on a tripod.

5S

[OFF]: Disables 5-Second Recording.

5S: Enables 5-Second Recording. ( pg. 28)

Anim.: Allows you to record a few frames only. By using an inanimate object and changing its position between shots, you can record the subject as though it is moving.

TELE MACRO

[OFF]: Disables the function.

ON: When the distance to the subject is less than 1 m, set “TELE MACRO” to “ON”. You can shoot a subject as large as possible at a distance of approx. 40 cm.

NOTE:

Depending on the zoom position, the lens may go out of focus.

WIDE MODE

[OFF]: Records with no change in the screen ratio. For playback on a TV with a normal screen ratio.

CINEMA: Inserts black bands at the top and

bottom of the screen. The

 

indicator appears.

During playback on wide-screen TVs, the black bands at the top and bottom of the screen are cut and the screen ratio becomes 16:9. When using this mode, refer to your wide-screen TV’s instruction manual. During playback/recording on 4:3 TVs/LCD monitor/viewfinder, black bands are inserted at the top and bottom of the screen and the image appears like a letter boxed 16:9 movie.

SQUEEZE : For playback on TVs with an aspect ratio of 16:9. Naturally expands the image to fit the screen without distortion. The

indicator appears. When using this mode, refer to your wide-screen TV’s instruction manual. During playback/recording on 4:3 TVs/ LCD monitor/viewfinder, the image is elongated vertically.

WIND CUT

[OFF]: Disengages the function.

ON : Helps cut down on noise created by wind. The “ ” indicator appears. The quality of the sound will change. This is normal.

Image 24
Contents GR-D240 Dear CustomerData Battery Wipe/Fader EffectsProgram AE with Special Effects Backlight CompensationImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedSome DO’S and DON’TS on the Safe USE of Equipment References Index EN Getting StartedConnectors IndicatorsControls Other PartsGetting Started LCD Monitor/Viewfinder Indications During Video RecordingBefore Using This Camcorder During Video PlaybackI T / M I 20 21 10 0Provided Accessories To protect the lens, attachProvided lens cap to Camcorder as shownPower Charging The Battery PackGetting Started EN Data Battery System Maximum continuous recording timeUsing AC Power About BatteriesGrip Adjustment Language SettingsViewfinder Adjustment Brightness Adjustment Of The DisplaySet the Power Switch to a or M while Tripod MountingLoading/Unloading a Cassette Or eject a cassetteTo protect valuable recordings Basic Recording Tape Remaining TimeApproximate recording time While using the LCD monitor While using the viewfinderEN Video Recording ZoomVideo Recording EN Journalistic ShootingTime Code Quick ReviewTo control the speaker volume EN Video PlaybackShuttle Search Blank SearchIf using a VCR, go to . If not, go to step Video Playback ENStart playback on the camcorder.  pg EN Menus for Detailed Adjustment Menus without Sub MenusMenus with Sub Menus Recording Menus Wide Mode DISTele Macro Wind CUTMenus for Detailed Adjustment EN Playback Menus When set to OFF, the camcorder’s display disappears OFF / on pg , Time Code  pg , AUX MICEN Features for Recording To take a snapshot in the 5-second recording modeSecond Recording To deactivate Night-ScopeFeatures for Recording EN Motor Drive ModeManual Focus Snapshot For Video RecordingExposure Control To return to automatic exposure controlTo return to automatic iris control To lock the exposure control and the irisTo cancel Spot Exposure Control Press Back Light once so that the indicator disappearsBacklight Compensation Spot Exposure Control To lock the irisWhite Balance Adjustment To change the settingTo return to automatic white balance Wipe Or Fader Effects To deactivate the selected effectVariable Shutter Speed 1/250 1/4000 Switch To VCR Dubbing To a VCREditing EN To S-VIDEO Yellow to Video Red to Audio R White to Audio LDubbing EN EditingTo DV OUT Connection To a Personal Computer EN Troubleshooting PowerAdvanced features Video RecordingTroubleshooting EN Other problemsUSE Cleaning Cassette Check TAPE’S Erase Protection TABCONDENSATION, Operation Paused Please Wait TapeUnit in Safeguard Mode Remove and Reattach Battery Unit in Safeguard Mode Eject and Reinsert TapeLens CAP HDVCleaning The Camcorder EN User MaintenanceTo clean the exterior To clean the LCD monitorBattery Packs CassettesEN Cautions LCD MonitorMain Unit About moisture condensation Serious malfunctioningEN Specifications CamcorderAC Adapter Ø3.5 mm, stereoRecording Capacity TermsGR-D240