Kenwood MD-R2 operation manual When both tracks have a name, To combine two non-continuous tracks

(Continued)

ENTER NAME/TOC EDIT

1

TRACK
	1	2	3	4	5	6	7
REMAIN	8	9	10	11	12 13 14
	15 16		17	18

(To combine the fourth track and the fifth track)

2

	1	2	3	4	5	6	7
REMAIN	8	9	10	11	12 13 14
	15 16		17	18

3

4

TOC	TRACK
		1	2	3	4	5	6	7
	REMAIN	8	9	10	11 12 13 14
		15 16		17

■COMBINE

1While in the stop mode, select the second of the two tracks you want to combine using the jog dial.

Or start playing the second of the two tracks you want to combine, and then press the 06 button.

●The unit will enter the pause mode.

2 Press the NAME/TOC EDIT button, and then select “COM- BINE” using the jog dial.

3 Within 10 seconds, press the ENTER button.

●To cancel the operation, press the ■ button.

4 Press the ENTER button again.

●The two tracks are combined, and the unit is paused at the beginning of the combined track.

●The numbers assigned to the tracks following the combined track are automatically decreased by one.

When both tracks have a name:

●When only the first track has a name → That name will be used.

●When only the second of the two tracks has a name → That name will be used.

●When both tracks have a name → The name of the first track will be used.

To combine two non-continuous tracks:

(Example: the first and third tracks)

Move the third track to the second track using the MOVE function. (Page 24)

Then, combine the first and second tracks using the COMBINE function.

Notes:

●Tracks recorded from analog inputs cannot be combined with tracks recorded from CDs or MDs using the digital inputs.

●Tracks recorded in the stereo mode cannot be combined with tracks recorded in the monaural long-play mode.

●Tracks where either track's recording time is less than 15 seconds may not be combined.

23

MD-R2