Kenwood MD-R2 operation manual Troubleshooting

Page 36

(Continued)

Types of discs

There are two types of discs: playback-only and recordable type.

Playback-only MiniDisc:

This type of MiniDisc is used for commercially available pre-recorded music. This is the same kind of optical disc as CDs. Playback is performed using an optical pickup. (Recording and editing are not possible.)

A shutter will be used on only one side (back).

Recordable MiniDisc:

This is a “raw disc” on which recording can be performed. A magneto optical disc is used.

Recordings are made using a laser and magnetic field. Repeated recording is possible.

Shutters will be used on both sides.

High-speed access

A unique feature of the MiniDisc is the ability to locate the beginning of a desired track at high speed.

This is because the track number and track name data is stored in a TOC (Table of Contents).

Disc

TOC

Sound data

Shock Resistant Memory

During playback, approximately 10 seconds of information is stored in the semiconductor memory. Therefore, even when the pickup cannot read information for a second or two due to an external shock, the sound continues without interruption because the information stored in memory is output.

TROUBLESHOOTING

Moisture condensation

In the following cases, condensation may form inside the unit.

Shortly after turning on a heater.

When the unit is placed in a room where there is exces- sive steam or moisture.

When the unit is moved from a cool place to a warm place.

When the unit has condensation inside, the disc signals cannot be read, and the product may not function properly.

If this happens, remove the disc, and open the disc holder. The condensation should evaporate in ap- proximately 1 hour. The unit will then function properly.

If a power failure occurs during recording

If the AC power plug is disconnected from the AC outlet or a power failure occurs during recording (before the TOC information has been recorded on the disc), the audio portion being recorded at that time will be erased. When a recording is being added to a MiniDisc which already has a recording on it, if the TOC is not updated before the power failure, the added recording will be erased.

If a power failure occurs or the AC power cord is dis- connected for about 10 minutes, when power is restored, TOC will be written on the disc.

If a problem occurs

If this product is subjected to strong external inter- ference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction or the display may not function correctly. If such a problem occurs, do the following:

Unplug the AC power cord from the AC outlet.

Wait about 20 - 30 seconds and then plug the AC power lead back into the AC outlet.

Press the reset button on the back of the unit.

RESET

Pen, pencil, etc.

When the reset button is pressed, all of the settings in memory will be erased.

If strange sounds, smells or smoke come out of the unit or if a foreign object falls into the unit, turn off the power, unplug the AC power cord from the AC outlet, immedi- ately. Contact your nearest authorized Sharp servicer.

35

MD-R2

Image 36
Contents MD-R2 Important Safeguards ContentsAccessories Features PrecautionsGeneral Installation location CondensationNames of Controls and Indicators Level Meter/Character Informa Clock IndicatorFront panel Rear panelRemote Control Loading the batteries for the remote controlProper use of the remote control Names of controlsConnections When connecting the unit to equipment that has line jacks Connecting the AC power cord How to turn the power on or offHow to read the display Jog DialSetting the Clock Setting the dateSetting the time Resetting the date and timeChecking the date and time Playing a Minidisc PlaybackTo remove a MiniDisc To interrupt playbackApss Auto Program Search System Repeat play/random play Remote control operation Cue and reviewTo cancel the Apms Automatic Programmable Music SelectorTo clear the programmed selections To check which tracks are programmedConnecting headphones Listening to music through headphonesMusic scan play When recording from analog inputs RecordingDifferences from tape recordings Disc writing TOCHow to select the inputs When making a digital recordingWhen recording from analog inputs Recordings cannot be made in the following situationsRec cancel Sound synchro recordingTo re-record Recording tracks as a single track Remote control operation To create your own track numbers while recordingEditing Program move functionUsing the editing function Edit menu selectionDivide When both tracks have a name To combine two non-continuous tracksMove Programmed moveTo erase tracks one at a time To erase all of the tracks at onceTrack/disc name To select characters StepTo enter characters Step Type of characters usedTo create a disc name MD-R2To create a track name To change disc names and track names To change disc namesTo change track names To erase a character To add a characterTo correct a spelling To erase disc names or track namesHOW to USE the BUILT-IN Timer To select the timer mode playback/recording StepTo set the start time and the stop time Step To use timer playback -A To use timer recording -BTo check the timer setting To cancel the timer operationMinidisc System Limitations What is a MINIDISC? What is a MiniDisc?Handling the MiniDisc Adaptive TRansform Acoustic Coding AtracTroubleshooting Remote control GeneralAudio Number or symbol Maintenance SpecificationsTimer/clock Remote control External careLimited Warranty Sharp Plaza, Mahwah, New Jersey

MD-R2 specifications

The Kenwood MD-R2 is a versatile and compact micro component system that promises high-quality audio performance in a sleek and modern design. This device is especially popular among audiophiles and casual listeners alike due to its rich features and user-friendly interface.

One of the standout features of the MD-R2 is its integrated MD (MiniDisc) player and recorder. This allows users to enjoy their favorite tracks while also having the option to record audio from various sources. The MiniDisc format provides a unique blend of digital sound quality and portability, making it ideal for music lovers who appreciate clarity and convenience. The device supports both playback and recording, allowing users to create custom playlists on MiniDiscs with ease.

In terms of connectivity, the Kenwood MD-R2 is equipped with multiple input options. These include built-in FM and AM tuners for radio enthusiasts, as well as auxiliary inputs for connecting external devices such as smartphones or tablets. The inclusion of a CD player also means that users can enjoy their traditional CD collections, ensuring that the MD-R2 caters to a wide range of audio formats.

The design of the MD-R2 is another key highlight. Its compact size makes it suitable for various room settings, from living rooms to bedrooms, without occupying too much space. The unit features an attractive display that showcases track information, making navigation simple and intuitive. The controls are straightforward, allowing users to seamlessly switch between different modes and adjust settings as needed.

The sound quality of the Kenwood MD-R2 is impressive, providing a balanced audio experience with rich bass and clear treble. It is designed with built-in speakers that deliver a powerful sound, perfectly suited for both casual listening and more immersive audio experiences. The sound output can be enhanced by connecting additional speakers, thanks to its speaker output connections.

Additionally, the MD-R2 includes various sound processing features that enhance playback quality. These may include equalization settings, allowing users to customize the sound profile according to their preferences. Whether you're enjoying classical music, rock, or electronic, the MD-R2 has the capability to deliver an enjoyable listening experience.

Lastly, the build quality of the Kenwood MD-R2 reflects the brand's commitment to durability and reliability. This micro component system is designed to withstand regular use while delivering consistent performance over time. With its combination of features, sound quality, and aesthetic appeal, the Kenwood MD-R2 remains a popular choice for those who seek a compact and capable audio solution.