Kenwood MD-R2 operation manual Recording, Differences from tape recordings, Disc writing TOC

Page 16

RECORDING

■Differences from tape recordings

You cannot record music on the reverse side of a MiniDisc.

MiniDiscs cannot be incorrectly inserted, i.e. upside down. (Page 35)

You don't need to search for the starting point at which to record.

The unit automatically finds the point at which rec- ording can start. Recording will start from that point.

You can check the total or remaining recordable time (possible recording) before recording.

This lets you plan a recording session so that the last song will not come to an abrupt end before it has finished. (Page 17)

The date and time of a recording are automatically saved with the recording.

If you have set the date and time, they will be automatically recorded when a recording is made. (Page 10)

■Disc writing (TOC)

MiniDiscs have one area in which the sound is recorded and another area where track number, track name, and disc name information is recorded.

Area for recording track

Area for recording the

numbers, track names, etc.

sound

First the sound is recorded on a MiniDisc, and then the in- formation (TOC: Table of Contents) for finding the tracks is recorded. This TOC is vitally necessary for playback. Tracks can be edited by rewriting the TOC. When the POWER but- ton is pressed to turn the power off or when the 7 button is pressed to remove the Minidisc, the current version of the TOC will be written on the disc. Therefore, after pressing the POWER button, do not jar the main unit. It may not be possible to perform playback properly if the TOC is not writ- ten correctly on the disc.

■Track numbers are created automatically

When recording from another CD or MD using the digital connectors

When you make a digital recording from a CD player or another MD player, new track numbers will be created auto- matically for each track, regardless of the amount of silence between tracks. (Synchro marker function)

First track

 

Second track

 

Third track

Track A

 

Track B

 

Track C

First track

 

Second

 

Third track

 

 

 

track

 

Track A

 

Track B

 

Track C

 

 

 

 

 

●When you record from a CD to a Minidisc, the track numbers recorded on the MiniDisc may not match the track numbers on the CD.

●When recording from digital equipment such as DAT tape recorders, the synchro marker function will not work. The auto marker function will work the same way it does when recording from an analog input.

●When a DAT is recorded using the digital inputs and the DAT mode (sampling frequency) changes during the recording session, the track numbers will change.

Very occasionally, some noise may be recorded.

If this happens, you can edit out the noise after recording. (Page 22)

When recording from analog inputs

When making an analog recording, if there is 1.5 seconds or more of silence, the blank space is assumed to be the space between tracks, and a new track number will be created automatically.

This is called the auto marker function.

By creating track numbers, you can locate the beginning of the tracks.

About 1.5 seconds

Silence

First track

 

 

Second track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

●If you do not use the auto marker function, you can record musical selections as a single track.

15

MD-R2

Page 15 Page 17
Image 16
Page 15 Page 17
Contents MD-R2 Contents Important SafeguardsAccessories Features PrecautionsGeneral Installation location CondensationNames of Controls and Indicators Level Meter/Character Informa Clock IndicatorFront panel Rear panelRemote Control Loading the batteries for the remote controlProper use of the remote control Names of controlsConnections When connecting the unit to equipment that has line jacks Connecting the AC power cord How to turn the power on or offHow to read the display Jog DialSetting the Clock Setting the dateResetting the date and time Setting the timeChecking the date and time Playing a Minidisc PlaybackTo remove a MiniDisc To interrupt playbackApss Auto Program Search System Repeat play/random play Remote control operation Cue and reviewTo cancel the Apms Automatic Programmable Music SelectorTo clear the programmed selections To check which tracks are programmedListening to music through headphones Connecting headphonesMusic scan play When recording from analog inputs RecordingDifferences from tape recordings Disc writing TOCHow to select the inputs When making a digital recordingWhen recording from analog inputs Recordings cannot be made in the following situationsRec cancel Sound synchro recordingTo re-record Recording tracks as a single track Remote control operation To create your own track numbers while recordingEditing Program move functionUsing the editing function Edit menu selectionDivide When both tracks have a name To combine two non-continuous tracksMove Programmed moveTo erase tracks one at a time To erase all of the tracks at onceTrack/disc name To select characters StepTo enter characters Step Type of characters usedTo create a disc name MD-R2To create a track name To change disc names To change disc names and track namesTo change track names To erase a character To add a characterTo correct a spelling To erase disc names or track namesTo select the timer mode playback/recording Step HOW to USE the BUILT-IN TimerTo set the start time and the stop time Step To use timer playback -A To use timer recording -BTo cancel the timer operation To check the timer settingMinidisc System Limitations What is a MINIDISC? What is a MiniDisc?Handling the MiniDisc Adaptive TRansform Acoustic Coding AtracTroubleshooting General Remote controlAudio Number or symbol Maintenance SpecificationsTimer/clock Remote control External careLimited Warranty Sharp Plaza, Mahwah, New Jersey

MD-R2 specifications

The Kenwood MD-R2 is a versatile and compact micro component system that promises high-quality audio performance in a sleek and modern design. This device is especially popular among audiophiles and casual listeners alike due to its rich features and user-friendly interface.

One of the standout features of the MD-R2 is its integrated MD (MiniDisc) player and recorder. This allows users to enjoy their favorite tracks while also having the option to record audio from various sources. The MiniDisc format provides a unique blend of digital sound quality and portability, making it ideal for music lovers who appreciate clarity and convenience. The device supports both playback and recording, allowing users to create custom playlists on MiniDiscs with ease.

In terms of connectivity, the Kenwood MD-R2 is equipped with multiple input options. These include built-in FM and AM tuners for radio enthusiasts, as well as auxiliary inputs for connecting external devices such as smartphones or tablets. The inclusion of a CD player also means that users can enjoy their traditional CD collections, ensuring that the MD-R2 caters to a wide range of audio formats.

The design of the MD-R2 is another key highlight. Its compact size makes it suitable for various room settings, from living rooms to bedrooms, without occupying too much space. The unit features an attractive display that showcases track information, making navigation simple and intuitive. The controls are straightforward, allowing users to seamlessly switch between different modes and adjust settings as needed.

The sound quality of the Kenwood MD-R2 is impressive, providing a balanced audio experience with rich bass and clear treble. It is designed with built-in speakers that deliver a powerful sound, perfectly suited for both casual listening and more immersive audio experiences. The sound output can be enhanced by connecting additional speakers, thanks to its speaker output connections.

Additionally, the MD-R2 includes various sound processing features that enhance playback quality. These may include equalization settings, allowing users to customize the sound profile according to their preferences. Whether you're enjoying classical music, rock, or electronic, the MD-R2 has the capability to deliver an enjoyable listening experience.

Lastly, the build quality of the Kenwood MD-R2 reflects the brand's commitment to durability and reliability. This micro component system is designed to withstand regular use while delivering consistent performance over time. With its combination of features, sound quality, and aesthetic appeal, the Kenwood MD-R2 remains a popular choice for those who seek a compact and capable audio solution.
Top Page Image Contents