Universal Electronics Comprehensive URCSupport for Universal Remote Manuals and Troubleshooting

Clearing the Master Power Key

1.On the remote control, press and hold SETUP until the last-selected device key blinks twice.

2.Enter 9 9 5. The last-selected device key blinks twice.

3.Press and release PWR.

4.Press and hold SETUP until the CBL key blinks twice.

RE-ASSIGNING DEVICE KEYS

The Atlas DVR/PVR 5-Device Universal Remote Control with Learning can be set up to control a second device of an already-assigned type. For example, to have the unit control a TV, a Cable Converter, and two DVD players, re-assign the unused AUX key to operate the second DVD Player as follows:

NOTE:	AUX is preset at the factory to control an RCA
	VCR. Performing the steps below will over-
	write those settings.
1.	On the remote control, press AUX once; it will
	blink once. Then press and hold SETUP until
	the AUX key blinks twice.
2.	Enter 9 9 2. The AUX key will blink twice.

3.Press DVD once, then press AUX once. The AUX key will blink twice.

The AUX key is now ready to be programmed for your second DVD player. See “Programming Device Control” on page 8. To re-assign other device keys, repeat these and substitute the key sequence using the following chart:

www.urcsupport.com

21