Universal Electronics DVR/PVR 5-Device, M11055BS manual Searching for Your Code

ume control (see “Programming Device Con- trol” starting on page 8).

4.Aim the remote control at your TV/VCR

Combo and press PWR once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starting on page 11).

5.For future reference, write down each working device code in the boxes below:

TV/VCR Code

TV Code (if used)

SEARCHING FOR YOUR CODE

If your home entertainment device does not respond to the Atlas DVR/PVR 5-Device Universal Remote Control with Learning after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

For example, to search for a code for your TV:

1.Turn on your TV.

2.On the remote control, press TV once; it will blink once. Then press and hold SETUP until

the TV key blinks twice.

3.Enter 9 9 1. The TV key will blink twice.

4.Aim the remote control at the TV and press PWR once.

5.Press CH+ one or more times and stop when the TV turns off.

NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.

www.urcsupport.com

11