presses, the remote exits programming.
Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 5.
Press a mode key twice (i.e., AUX, DVD, AUD, TV, or CBL) to clear all the learned keys for that mode. The LED blinks twice.
Repeat step 2 for another mode or press and hold SETUP to exit programming.
If more than 15 seconds pass between key
Deleting All Learned Keys in a Specific Mode NOTE:
1.
2.
3.
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control capabilities are locked to the cable converter. The affected keys* are 1 through 0, CH+, CH-, ENTER, and LAST. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes.
*NOTE: This feature does not affect the AUD mode.
Unlocking Channel Control
1.On the remote control, press CBL once; it will blink once. Press and hold SETUP until the 
CBL key blinks twice.
2.Enter 9 7 3. The CBL key will blink twice.
3.Press CH- once. The CBL key will blink four 
times.
Now the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.
