Universal Electronics M11055BS, DVR/PVR 5-Device Learning Precautions, Programming a Learned Key

Learning Precautions

•Your original remote controls must be in working order for learning to work properly.

•Learned keys are mode-specific, so each one can store a unique function for each mode.

•Do not use the following keys for learning: Device Keys, SETUP, Record (•), Tune-In Keys.

•Learning capacity is approximately 16 to 25 keys, depending on the code being learned.

•Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats.

•For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming learning.

Programming a Learned Key

NOTE: If more than 15 seconds pass between key presses, the remote exits programming.

1.Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 5.

NOTE: If the LED displays one long flash instead, either your batteries are low, or the Atlas DVR/ PVR 5-Device Universal Remote Control with Learning has a memory fault. In either case, the remote will not learn a new key. See “Addi- tional Information” on page 24.

2.Press a mode key once (i.e., AUX, DVD, AUD, TV, or CBL) to assign a mode for learning, then the key that will learn the new code.

3.Place the Atlas DVR/PVR 5-Device Universal Remote Control with Learning head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that you want the Atlas DVR/ PVR 5-Device Universal Remote Control with Learning to learn.

2"

www.urcsupport.com

13