Universal Electronics M11055 Using the Master Power KEY, Will turn the selected device on or off

Master Power Key

After programming, point the remote control at the devices. Press CBL once.

Press PWR once to sequentially turn the programmed home entertainment devices on or off.

Enter 9 9 5. The last-selected device key blinks twice.

Press PWR once.

For the first device you want in the power on sequence, press a device key (e.g., CBL) once. Then press PWR once.

Repeat step 4 up to four more times to add the second, third, fourth, and fifth device, as desired.

To save the settings and exit the program:

On the remote control, press and hold SETUP until the last-selected device key blinks twice.

USING THE MASTER POWER KEY

The Atlas DVR/PVR 5-Device Universal Remote Control with Learning has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press.

NOTE:	MASTER POWER (PWR) only works in the CBL
	mode. If it is not programmed, only the cable
	converter will turn on or off. In any other
	mode, pressing MASTER POWER (PWR) once
	will turn the selected device on or off.

Programming the Master Power Key 1.

2.

3.

4.

5.

6.

a.Press CBL once.

b.Press and hold SETUP until the CBL key blinks twice.

Using the

1.

2.

You will see the devices turn on or off according to the programmed sequence.

www.urcsupport.com

20