SMC Networks SMC2804WBRP-G Getting to Know the Barricade, LED OFF Flashing PWR Power, Spd Wan

Barricade g Wireless Router with USB Print Server Manual

CHAPTER 2 Getting to Know the Barricade

The SMC2804WBRP-G Barricade Cable/DSL Broadband Router is the perfect solution for the home/office environment. This full-featured router offers:

•1 - USB 1.1 Print Server port

•802.11g Wireless with Performance Enhancing Nitro™ Technology

•4 - 10/100 Mbps Auto-Sensing LAN ports with Auto-MDI MDIX feature

•1 - 10/100 Mbps WAN port with Auto-MDI MDIX feature

•Comprehensive LEDs for network status and troubleshooting

•Reset Button

2.1 LED Indicators

The Barricade includes LED indicators on the front panel that simplify installation and network troubleshooting.

LED	ON	OFF	FLASHING
PWR (POWER)	Receiving power	Not receiving power	N/A
SPD (WAN)	100Mbps WAN	10Mbps WAN	N/A
	connection detected	connection detected
Link/ACT (WAN)	Good WAN connection	No WAN connection	Data transmitting
	detected	detected	through the WAN
WLAN	Wireless function is	Wireless function is	Data transmitting
	enabled	disabled	through wireless
Link/ACT (LAN)	Good LAN connection	No LAN connection	Data transmitting
	detected	detected	through the LAN

Resetting the Barricade

The Reset button is located on the rear panel of the Barricade Broadband Router. Use a paper clip or a pencil tip to push the Reset button.

Reset

If the Router is having problems connecting to the Internet, simply unplug the router for 3 seconds then plug back in.

Restore Factory Defaults

If resetting the router does not resolve your issue, then you can follow these steps:

1.Leave power plugged into the router

2.Locate the reset button on the back panel, press and hold until WAN LED flashes off.

3.Release reset button.

5