Printek 8000SE manual Stop Bits, Parity None, Busy Polarity Low, DTR Power On/Off

P R I N T E R C O N F I G U R A T I O N

8

Possible Values: 8*, 7

This item selects the number of data bits in the serial character frame. This must be set to match the character size setting on the host computer.

Stop Bits

Possible Values: 1*, 2

Stop Bits 1

This item sets the number of stop bits to be used at the end of the serial character frame. This must be set to match the stop bit setting on the host computer.

Parity

Possible Values: None*, Even, Odd

Parity None

This item selects the parity checking requirements for the serial data bits. This must be set to match the parity setting on the host computer.

Busy Signal Polarity

Possible Values: Low*, High

Busy Polarity Low

This item selects the polarity of the busy signal (pin 11 of the RS-232C interface). Busy is set whenever the printer is offline, the serial input buffer is full, or another interface port is currently active (see “Automatic Port Switching” earlier in this section).

Data Terminal Ready

DTR Power On/Off

54