Printek 8000SE manual Down/Up Print, ⎯0.30→

D A I L Y O P E R A T I O N

MOVE

Down/Up

PRINT 0.00”

×

The VALUE buttons will move the print down or up in 1/100th inch increments. Note again that the arrow will change according to the direction the print is to be moved from the normal print position. The maximum distance print may be moved is 9.99 inches in either direction.

Example

In this example, a number needs to be printed in a box on a preprinted form. This form could be a packing list, an invoice, or a check. The first time the page is printed, the number misses the box as shown below.

12345

In this case, the print needs to be moved to the right and down. To accomplish this, press ALIGN PRINT and access the Left/Right option. First move the print to the right using the VALUE buttons. It appears that the text needs to move about three characters. If the text is being printed at 10 cpi (characters per inch), this would be 0.30 inches. After making this adjustment the display would look as follows.

MOVE

Left/Right

PRINT

⎯0.30”→

If you were to print this form now, it would appear as follows, showing that the print still needs to be moved down.

12345

To move the print down, access the Down/Up option by pressing either of the ITEM buttons. It appears that the print needs to be moved down nearly the height of the characters. These characters are approximately 0.10 inches tall, so move the print down about 0.08 inches. The display should look as follows.

37