P R I N T E R C O N F I G U R A T I O N
This item sets the Imager or ImagerPlus emulation mode. QMS CodeV v2 selects QMS Code V version 2, PTX CodeV v2 selects Printronix Code V version 2.
Control Character
ControlCharact
er
^ (5E Hex)
Possible Values: ^ (5E Hex)*
SOH (01 Hex) through HT (09 Hex),
SO (0E Hex) through (FF Hex)
This item sets the control character used to begin commands. The character normally used for QMS is the caret (^) and the character nomally used for IGP is the tilde (~) (if you change the emulation to Printronix IGP, you may need to change the control character to the tilde).
Line Terminator
Possible Values: LF*, CR
Line
Terminator
LF
This item sets the line terminating character to a Line Feed or a Carriage Return.
Bar Code Density
Bar Code
Density
High-Res
Possible Values:
This item sets the density, or graphics resolution, for bar codes.
QMS Character Set
(QMS CodeV v2 and PTX CodeV v2 only)
QMS Char Set
USA
66
