Printek 8000SE manual Printer Self-Test, Selecting Which Form to Print

G E T T I N G S T A R T E D

Selecting Which Form to Print

11.Close the paper door.

12.Press the FORM SELECT button until the desired form is displayed and then press the LOAD button. The printer will now move the selected form into position for printing.

13.Place the printer on line by pressing the ONLINE button.

Printer Self-Test

The printer performs many self diagnostics each time power is turned on. If you wish to perform an actual printing test, use the following steps.

1.Make sure the printer is powered on with ribbon and paper loaded.

2.Take the printer off line (the ONLINE indicator will be flashing red).

3.Press the SETUP/MENU button four times to display TEST MENU on the front panel.

4.Press either of the ITEM buttons until Test Mode is displayed on the top line.

5.Press either of the VALUE buttons until Barber Pole is displayed on the bottom line.

6.Press the ONLINE button.

7.The printer will now exit Setup and begin printing a rotating character pattern. To stop or restart printing the test pattern, press the ONLINE button.

8.To take the printer out of the test mode, stop the test by pressing the ONLINE button.

9.Press the SETUP/MENU button four times to display TEST MENU.

10.Press either of the ITEM buttons until Test Mode is displayed on the top line.

19