Printek 8000SE manual Automatic Cut No, Cut Adjustment, Lines/Inch, Form Length 66 Lines

P R I N T E R C O N F I G U R A T I O N

the next path, or paths, and continue printing until all the specified paths are empty.

Automatic Cut

Automatic Cut No

Possible Values: No*, Yes

This item is only available when the optional FormsCutter is installed in the printer. When set to Yes, the printer will automatically cut each form at the perforation (based upon the Form Length setting) and eject the form into the paper basket that is installed with the FormsCutter. If set to No, the paper will exit through the lower, continuous paper path into the basket on the print stand. To manually cut a form or report at the end of the current page, the user can take the printer offline and press the UNLOAD button. See the FormsMaster 8000se Series FormsCutter Manual for additional information.

Cut Adjustment

Cut Adjustment 0

Possible Values: Auto, -0.2951” … 0* … +0.2951”, Auto

This item may be used to adjust the position of the cut relative to the top-of- form for improved cut accuracy. This item is only available when the optional FormsCutter is installed. Refer to the FormsCutter manual for more information.

Lines Per Inch

Possible Values: 6*, 8

Lines/Inch

6

This item sets the line pitch to 6 or 8 Lines Per Inch (LPI).

Form Length

Form Length 66 Lines

46