Printek 8000SE manual Entering the Interface Menu, Serial

P R I N T E R C O N F I G U R A T I O N

Interface Menu

The Interface Menu may contain several submenus. These submenus are for setting up items pertaining to the hardware interfaces such as the serial and parallel ports as well as the optional 10/100BaseT Ethernet or the Wireless Print.

The Setup items for each interface are described in one of the following sections.

RS-232C Serial Interface on page 52

Parallel/LAN Interfaces on page 57

Entering the Interface Menu

To Enter the Interface Menu, enter Setup and press the MENU button until INTERFACE MENU is displayed on the top line as shown below.

INTERFACE MENU

Serial

The SUBMENU options for the INTERFACE MENU always include the Serial and Parallel ports. The other ports mentioned earlier will only be displayed if they are installed in the printer. This is also true of the Imager or ImagerPlus graphics options. To select the desired interface, press the SUBMENU button until that interface is displayed on the bottom line. Next press either of the ITEM buttons to begin displaying the items associated with that interface. Each interface and the items which pertain to that interface are listed on the following pages. Note that many items are the same for more than one interface since the computer attached to that interface may have different requirements for each of those items.

The factory default values are indicated with an asterisk (*) in this manual (the asterisk does not appear on the printer’s display).

51