Printek 8000SE manual Remote Setup Example File

A D V A N C E D S E T U P F E A T U R E S

QMSCharacterSet=USA,UnitedKingdom,

Sweden/Finland,Norway/Denmark,Japan,

Germany,France,Italy,Spain,PCSubset,

CodeVVersion1

Translation=NotActive,Active

FreeFormat=NotActive,Active

IgnoreData=NotActive,Active

ImagerZero=Slashed,Normal

LineRegistration=NotMaintained,Maintained

VerticalDPI=72,70

VerticalTextSpacing=Version2,Version1

CodeVSpaceFields=Process,Ignore

IGPCharacterSet=ASCII,Germany,Sweden,Denmark,

Norway,Finland,English,Dutch,

France,Spain,Italy,Turkey

DeleteLogos=No,Yes

QuietMode=NotActive,Active

Spacing=IGP10/20/40,IGP30

[Security]

AlignPrint=ViewOnly,EditAllowed

FormsMenu=ViewOnly,EditAllowed

InterfaceMenu=ViewOnly,EditAllowed

OptionsMenu=ViewOnly,EditAllowed

[EndPrintekSetup]

Remote Setup Example File

The following example will set up three forms. Before the forms are set up, “AlignPrint” and all “Forms” will be reset to their factory default values so that only the “non-default” values have to be set.

The first form will begin printing one line from the top-of-form, be named “CHECKS”, have a form length of 42 lines (7 inches at 6 LPI), and use the Epson FX Draft font.

The second form will begin printing two characters (at 10 CPI) from the left edge and two lines (at 6 LPI) from the top edge of the form. The name will be “INVOICES” and will print using the Epson FX Draft font.

88