Sony CCD-TR311 operating instructions Maintenance information and precautions

Page 61

Maintenance information and precautions

Moisture condensation

If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly. To prevent possible damage under these circumstances, the camcorder is furnished with moisture sensors. Please, take the following precautions.

Inside the camcorder

If there is moisture inside the camcorder, the beep sounds and the { indicator flashes. If this happens, none of the functions except cassette ejection will work. Open the cassette compartment, turn off the camcorder, and leave it about 1 hour. When 6 indicator flashes at the same time, the cassette is inserted in the camcorder. Eject the cassette, turn off the camcorder, and leave also the cassette about 1 hour. The camcorder can be used again if the { indicator does not appear when the power is turned on again.

On the lens

If moisture condenses on the lens, no indicator appears, but the picture becomes dim. Turn off the power and do not use the camcorder for about 1 hour.

How to prevent moisture condensation

When bringing the camcorder from a cold place to a warm place, put the camcorder in a plastic bag and allow it to adapt to room conditions over a period of time.

(1) Be sure to tightly seal the plastic bag containing the camcorder.

(2) Remove the bag when the air temperature inside it has reached the temperature surrounding it (after about 1 hour).

Additional information

Video head cleaning

To ensure normal recording and clear pictures, clean the video heads. When the vÊindicator and “ CLEANING CASSETTE” message appear one after another or playback pictures are “noisy” or hardly visible, the video heads may be dirty.

[a]

[b]

[a] Slightly dirty

 

[b] Very dirty

 

If this happens, clean the video heads with the Sony V8-25CLH/V8-25CLD cleaning cassette (not supplied). After checking the picture, if it is still “noisy,” repeat the cleaning. (Do not repeat cleaning more than 5 times in one session.)

Caution

Do not use a commercially available wet-type cleaning cassette. It may damage the video heads.

Note

 

If the Sony V8-25CLH/V8-25CLD cleaning cassette is not available in your area, consult

 

your nearest Sony dealer.

61

Image 61 Contents
Video Camera Recorder Welcome Table of contents Types of differences Using this manualPrecaution on copyright Using this manualPrecautions on camcorder care Operational for effective useWireless Remote Commander 1 p Checking supplied accessoriesAC-L10A/L10B/L10C AC power adaptor V connecting cable 1 p *for stereo model Shoulder strap 1 pInstalling the battery pack Installing and charging the battery packCharging the battery pack Installing and charging the battery packCharging time Battery lifeCCD-TR311/TR414 CCD-TR413To remove the battery pack To eject the cassette Inserting a cassetteTo prevent accidental erasure Camera Camera recordingTo stop recording momentarily a Camera recordingTo finish recording b To focus the viewfinder lensCamera recording When you shoot a subject using a telephoto zoom Using the zoom featureZooming speed Variable speed zooming To extend the recording time in 5SEC mode Selecting the START/STOP modeCCD-TR940 only Place the camcorder on a flat surface or use a tripod Hints for better shootingTo stop playback Checking the recorded pictureTo begin re-recording CCD-TR311/TR413/TR414 Connections for playbackNot supplied To cancel the Laser Link function Using the AV cordless IR receiver CCD-TR414/TR940 onlyConnections for playback To play back on a TVTo display the viewfinder screen indicators on the TV Using the remote commanderPlaying back a tape Playing back a tape Using headphones CCD-TR940 onlyTo locate a scene picture search To view the picture at 1/5 speed slow playbackUsing the house current Using alternative power sourcesUsing a car battery Using alternative power sourcesTo remove the car battery charger Player Changing the mode settingsChanging the mode settings Items for Camera mode only Following settings work only during playback Items for VTR/PLAYER mode onlyHiFi Sound STEREO/1/2 CCD-TR940 only TBC* ON/OFF CCD-TR940 onlyShooting with backlighting To make a fine adjustmentAfter shooting CCD-TR940 only Selecting the fader function Using the Fader functionFader mosaic Bounce Fade in onlyUsing the fader function When fading in a Using the Fader functionWhen fading out b When you use the bounce functionUsing the NightShot light To cancel the NightShot functionShooting in the dark NightShot CCD-TR940 onlySelecting the desired mode Using the wide mode functionFull FullUsing the wide mode function Using the wide mode functionTo cancel wide mode To watch the tape recorded in wide modeSelecting the best mode Using the Program AE functionUsing the Program AE function Using the Program AE functionTo turn off program AE CCD-TR940 only When to use manual focus Focusing manuallyFocusing manually Focusing manuallyTo return to autofocus mode To record a very distant subjectSelecting picture effect Enjoying picture effectEnjoying picture effect Using picture effect functionTo turn off picture effect CCD-TR940 only When to adjust the exposure Adjusting the exposureAdjusting the exposure To return to automatic exposure modeWhen you adjust the exposure manually Adjusting the exposureShooting with the sun behind you Shooting in the darkSuperimposing titles Superimposing a titleSuperimposing a title To select the language of preset titleTo superimpose the title from beginning To superimpose the title while you are recordingMaking your own titles Making your own titles Recording with the date/timeTo edit a title you have stored To delete a titleEach time you insert the cassette Optimizing the recording conditionTo stop using the built-in light Using the built-in lightCCD-TR413/TR414/TR940 only To turn on the built-in light automaticallyReplacing the bulb Using the built-in lightTo activate the Steady Shot function again Releasing the Steady Shot functionEditing onto another tape To check the picture from a VCR or TV before recording Recording from a VCR or TVTo stop recording Changing the lithium battery in the camcorder Changing the lithium battery Changing the lithium battery in the camcorderTo correct the date and time setting Resetting the date and timeTo check the preset date and time Year changes as followsSimple setting of clock by time difference When you play back What is Video 8 /Video Hi8 ?Usable cassettes and playback modes Selecting cassette types Battery life is shorter in a cold environment Tips for using the battery pack To save battery power When to replace the battery packBattery pack heats up Tips for using the battery packLife of the battery pack Charging temperatureHow the battery consumption is displayed What is InfoLITHIUMTo obtain more accurate remaining battery indication Maintenance information and precautions Removing dust from inside the viewfinder Maintenance information and precautionsTo reattach the eyecup CCD-TR311 onlyBuilt-in light Precautions Camcorder operationOn handling tapes Camcorder careIf battery leakage occurred AC power adaptorPower sources Using your camcorder abroadDifference in color systems Trouble check SymptomCamcorder Trouble check Symptom Cause and/or Corrective ActionsPicture Viewfinder Self-diagnosis displayFive-digit display Cause and/or Corrective Actions Video camera recorder SpecificationsLithium battery compartment p Lens cover Power switch pIdentifying the parts Editsearch button pIdentifying the parts #ª Menu button p @¥ Program AE dial p @» Eyecup #¼ Picture Effect button p#» Standby switch p #£ Viewfinder lens adjustment ring #¥ START/STOP button p#¢ Battery mounting surface $¼ Hook for shoulder strap pAdditional information VIDEO/AUDIO jacks pTo prepare the Remote Commander Remote CommanderTransmitter To enter demo mode To avoid damage from possible battery leakageTo exit demo mode Attaching the shoulder strapExposure indicator CCD-TR940 only p /Zoom indicator p Operation indicators Viewfinder Display windowSteady Shot off indicator CCD-TR414/TR940 only p @ª Full charge indicator pTape is near the end Battery is weak or deadTape has run out Index