Samsung SCC-B1031P, SCC-B1331P user manual Sign LC- e Or a O, ELC Electronic Light Control

How to use OSD Menu

sign

ct

.

he

LC- e

e of

or a O-

The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it.

②If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area.

you can set the desired BLC zone by defining the size and location.

		‹ALC‹
LENS				DC
LEVEL			[00]----I	----
	BACKLIGHT			BLC
	AREA			USER
	<SIZE>￿
	<LOCATION>￿
￿		￿		￿

If you use an ordinary camera in a scene with an intensive backlight, the object will be displayed dark on the monitor affected by the backlight. To solve this problem, you can use the BLC(Back Light Compensation) function to improve the sharpness of the image in such a high contrast scene.

–

•ELC (Electronic Light Control)

①If you press the SETUP switch when the ELC￿ submenu is selected, the corresponding screen appears. You can make the ELC (Electronic Light Control) function active or not.

‹ELC‹

LEVEL [00]----I----

BACKLIGHTOFF

￿ ￿ ￿

②In similar to ALC setting, you can specify the BLC area.

	‹ELC‹
LEVEL	[00]----I----
BACKLIGHT		BLC
AREA		USER
<SIZE>￿		ENG
<LOCATION>￿
￿	￿	￿

❖AGC

[OFF, VERY LOW, LOW, MID, HIGH, VERY HIGH, USER]

The AGC (Auto Gain Control) menu is used to set the AGC level of the camera. When the AGC is active, the camera automatically increases the sensitivity by amplifying the Video signal when the strength of the signal falls below the normal value.

If you press the SETUP switch with a USER sub menu selected, you will see the appropriate screen.

English – 17