Samsung SCC-B1331P, SCC-B1031P user manual Deo, Flickerless, White BAL, Day

How to use OSD Menu

TO 0,

/120)

r,

ect.

es ast e

LC will er

s

DEO

FF h

d

R(S2)

F

F

F

F

1/2000	ON	OFF	ON
1/4000	OFF	ON	ON
1/10K	ON	ON	ON

Note :

–If IRIS mode is set to ELC, the SHUTTER menu will be deactivated as you adjust the brightness using the electronic shutter.

–If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu.

–If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.

Automatically detects the ambient level of darkness in the dark or low contrast scene to extend the accumulated time, keeping the image bright and sharp;

❖ FLICKERLESS [OFF, ON]

If set to ON, the shutter speed will be fixed to 1/100(PAL:1/120) second. This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting.

❖XDR (eXtended Dynamic Range) [OFF, LOW, MID, HIGH]

Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility.

Select one from OFF, LOW, MID and HIGH. Closing to HIGH will increase the compensation level.

❖ WHITE BAL [DAY/NIGHT]

If you want to adjust the color scheme, use the WHITE BALANCE function.

•DAY

In DAY mode, you can set the color values of RED and BLUE. The screen will be displayed in colors according to your settings.

‹WHITE BAL‹

DAY/NIGHT			DAY
MODE		AWC￿
RED	[00]----I----
BLUE	[00]----I----
R-GAIN	[0248]
B-GAIN	[0247]

￿ ￿ ￿

 Note :
– You can set the values of R-GAIN and B-GAIN only in
AWC mode.
– If AGC is set to OFF or FIX, you can not access the
NIGHT menu.
– For adjusting the white balance, the following
5 modes are provided:
• ATW1(Auto Tracing White Balance mode	ENG
1): The camera can automatically adjust the
color temperature in real time, according to
the ambient conditions. The color temperature
ranges from approx. 2500K to 9300K.
• ATW2: The color temperature ranges from
approx. 2,000K to 10,000K.
• AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
• 3200K : Set color temperature to 3200K
• 5600K : Set color temperature to 5600K
– RED : Adjusts the strength of the red color.
– BLUE : Adjusts the strength of the blue color.
– R-GAIN/B-GAIN : Enables you to set the current
color temperature manually.
– BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.

–

English – 19