Charging the battery
•The battery that can be used with this unit is
•The battery is not charged when the camera is shipped. Charge the battery before use.
Make sure that the camera is turned off.
Insert the battery to this unit, and then connect this unit to the AC adaptor (supplied) (
) or a PC (
)
To the electrical outlet
USB connection cable
(supplied)
Computer
Getting ready:
Turn on the computer.
When charging the camera, connect the USB connection cable (supplied) to the [AV OUT/DIGITAL] socket (gold terminal). Connecting the cable to a wrong terminal may cause malfunction.
[AV OUT/DIGITAL] socket
• Place the camera in an upright position, and find the gold terminal at the bottom.
•Insert the USB connection cable so that its [
] mark will face the [
] mark side of the camera.
•Always check the direction of the pins and hold the plug straight to insert or remove it. (If the cable is inserted in the wrong direction, the pins could become deformed and cause faulty operation.) Also, do not insert into the wrong socket. Doing so may cause damage to this unit.
(ENG) VQT5E54 15