Troubleshooting
The Wi-Fi connection is not recognizing my PC.
●By default, the
The GPS status indicator lights up while the camera is turned off.
●[GPS Setting] is [ON].
→Electromagnetic waves from the camera can affect instruments and meters. In airplane cabins (during takeoff and landing) or in other restricted areas, set [Airplane Mode] to [ON], and then turn off the camera.
Positioning takes time.
●When using the camera for the first time or after not using it for a while, positioning may take several minutes.
●Positioning usually takes less than two minutes, but because the positions of the
GPS satellites change, it may take longer depending on the recording location and environment.
→Positioning can be executed faster when you download GPS assist data to the camera
using the “GPS Assist Tool”.
●Positioning will take time in environments where it is difficult to receive the signals from the GPS satellites.
The location name information is different from the recording location.
●Immediately after the camera is turned on or when the GPS icon is something other than [
], the location name information that is recorded in the camera may vary significantly from the current position.
●When [
] is displayed for the location name information, the information can be changed to a different candidate before starting to record. You can edit a place name or landmark name recorded in a picture.
Please refer to “Owner’s Manual for advanced features (PDF format)” for details.
36 VQT5E54 (ENG)