Message displays

[Some pictures cannot be deleted] [This picture cannot be deleted]

●Non-DCF pictures (→22) cannot be deleted.

→Save needed data on a computer or other device, and then use [Format] on the camera. (→30)

[No additional selections can be made]

●The number of pictures that can be deleted at once has exceeded. ●More than 999 pictures have been set as [Favorite].

●The number of pictures allowing [Resize] (multiple settings) at once has exceeded.

[Please turn camera off and then on again] [System Error]

●The lens is not working correctly.

→Turn on power again.

(Consult the dealer or your nearest Service Centre if display still remains)

[Some pictures cannot be copied] [Copy could not be completed]

●Pictures cannot be copied in the following cases:

→Picture of same name already exists in built-in memory when copying from card.

→File is not of DCF standard.

→Picture taken or edited on a different device.

[Not enough space on built-in memory] [Not enough memory on the card]

●There is no space left on the built-in memory or the card. When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

[Built-In Memory Error] [Format built-in memory?]

●Displayed when formatting built-in memory via computer, etc.

→Reformat directly using camera. Data will be deleted.

[Memory card error. This card cannot be used in this camera. Format this card?]

●The card format cannot be used with this camera.

→Save needed data on a computer or other device, and then use [Format] on the camera. (→30)

[Insert SD card again] [Try another card]

●Access to card has failed.

→Insert card again. ●Try with a different card.

Meanings and required responses to major messages displayed on LCD monitor.

[Memory Card Error] [Memory card parameter error]

●Card is not of SD standard.

●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are supported.

[Read Error]/[Write Error] [Please check the card]

●Data read has failed.

→Check whether card has been inserted correctly (→11). ●Data write has failed.

→Turn off power and remove card, before re-inserting and turning on power again. ●Card may possibly be damaged.

●Try with a different card.

[Motion recording was cancelled due to the limitation of the writing speed of the card]

●When recording motion picture, use a card rated with an SD speed class∗ of “Class 6” or higher.

∗SD speed class refers to a specification for sustained write speeds.

●If recording stops even when using a card with speed of “Class 6” or faster, the data writing speed is low. We recommend backing up the data on the memory card and reformatting it. (→30)

●Motion picture recording may be automatically terminated with certain cards.

[A folder cannot be created]

●Folder numbers in use have reached 999.

→Save needed data on a computer or other device, and then use [Format] on the camera. (→30)

[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]

●AV cable is connected to camera.

→To remove message immediately → Press [MENU/SET].

→To change aspect ratio → Change [TV Aspect] (→29). ●USB connection cable is only connected to camera.

→Message disappears when cable is also connected to another device.

72 VQT3E65

VQT3E65 73