Panasonic DMC-S3, DMC-S1 Inserting and removing the card optional/ the battery

Page 6

Charging the battery (Continued)

●The time required for charging varies depending on conditions of battery usage. Charging takes longer at high or low temperatures and when the battery has not been used for some time.

●Battery will be warm during charging and for some time thereafter.

●Battery will run out if not used for long periods of time, even after being charged. ●Charge the battery with the charger indoors (10 °C to 30 °C).

●Keep any metal items (such as clips) away from the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short-circuiting or resulting heat generated.

●We do not recommend frequently charging the battery.

(Frequently charging battery reduces maximum usage time and can cause battery to expand.)

●Do not disassemble or modify the charger.

●If available battery power is significantly reduced, battery is reaching end of lifespan.

Inserting and removing the card (optional)/ the battery

Turn off the power and slide the card/battery door out () before opening the door () as illustrated

Please purchase a new battery.

●The battery charger is in the standby condition when the AC power is supplied. The primary circuit is always “live” as long as the battery charger is connected to an electrical outlet.

●When charging:

•Remove any dirt on connectors of charger and battery with dry cloth.

•Keep at least 1 m (3.28 feet) away from AM radio (may cause radio interference).

•Noises may be emitted from inside of charger, but this is not a fault.

•Remove charger from wall socket after charging (up to 0.1 W consumed if left in place).

●Do not use a damaged or dented battery (especially connectors), e.g. by dropping (can cause faults).

Insert the battery and card, making sure that their orientation is correct

•Battery: Insert all the way firmly until a locking sound is heard, and check that the lever is hooked over the battery.

•Card: Insert all the way firmly until it clicks.

Close the card/battery door and slide the door in until you hear a locking sound

Lever

Do not touch the terminal

Charged battery (check orientation) Card (check orientation:

terminals face LCD)

10 VQT3E65

VQT3E65 11

Image 6

Contents DMC-S1 Contents Before use Standard Accessories Names of partsAbout batteries that you can use with this unit Charging the batteryDetach the battery after charging is completed Charging light ChargeInserting and removing the card optional/ the battery Insert DC coupler instead of battery Open DC coupler cover Inserting and removing the card optional BatteryUsing the DC coupler optional instead of battery Connect AC adaptor to DC in socket of DC couplerRemaining battery and memory capacity Picture save destination cards and built-in memoryRecording capacity guidelines pictures/recording time Setting the clock Press the Power buttonPress MENU/SET Confirm the setting and press MENU/SET Holding the camera Recording ModeAutomatic Scene Detection To use flashTaking pictures with zoom Zoom In/OutEnd recording Scroll through pictures Viewing your pictures Normal PlayPress the Playback button Watching motion picturesDeleting pictures To delete multiple up to 50 or all picturesPress MENU/SET Setting the menuPress to select a setting, and then press MENU/SET Press / several timesUsing the Setup menu Content of the card Deleted When a card/built-inRestored. Check Demo Mode Stabilizer DemoRecording Mode list Select Normal Picture Mode Take a pictureFirst adjust focus according to subject Display the screen for RecordingChanging recording information display Taking pictures with the self-timerDisplay Selftimer Select time duration Press to change displayTaking pictures with flash Available types in each modeAvailable flash range when Sensitivity setting is Display Flash Select the desired typeTaking pictures with Exposure Compensation Display Exposure Select a valueScene Uses, Tips Party NightFood BabyUseful features for travel World Time Select Home Select Destination Set your home areaSet destination area Rec Quality Using the Rec menuPicture Size SensitivityWhite Balance AF ModeSetting White Balance manually AWB operational rangeBurst Color ModeDigital Zoom AF Assist LampDate Stamp Different playback methods Playback ModeStabilizer Clock SetSlide Show Filtering PlayCalendar Using the Playback menu Select Single or Multi Select picture and make settingUpload Set Select size ResizeSelect Single Select still picture Select OK Select YesProtect To cancel while releasing all Press MENU/SETFavorite Set-up Press MENU/SET → Playback menu → Select FavoriteCopy Using with your PCTo cancel connection Select the copy method directionDouble-click LUMIXUP.EXE to start it Using PHOTOfunSTUDIO to copy pictures to your computerUploading pictures to image-sharing websites Select the upload destinationPrinting multiple pictures To cancel printPrinting Print with dateViewing on TV screen When using TVs with an SD card slotMake settings before selecting Print start Select item Connect camera to TV Turn on TVList of LCD monitor displays PlaybackMessage displays Monitor sometimes shuts off even though power is on Camera does not work even if power is turned onPower cuts off during use Cannot record picturesNo flash emitted Monitor flickers indoorsDate/age is not displayed Multiple flashes are emittedCannot send pictures to computer Cannot print when connecting to printerEdges cut off pictures when printing Cannot print the dateWhen in use Usage cautions and notes

Related manuals

Manual 35 pages 17.04 Kb