Panasonic DMC-FZ2PP operating instructions Charging the Battery, Connect the AC cable

Page 11

Preparation

Charging the Battery

1Connect the AC cable.

1	• The [POWER] indicator A lights.

THE SOCKET OUTLET SHALL BE

INSTALLED NEAR THE EQUIPMENT

AND SHALL BE EASILY ACCESSIBLE.

2 Attach the battery to the AC adaptor. (1 # 2)

• The [CHARGE] indicator B lights and charging starts.

3 When the [CHARGE] indicator B turns off, charging is finished.

•Charging is finished in about 90 minutes.

4Remove the battery from the AC adaptor.

•The battery cannot be charged when the DC cable is connected to the AC adaptor.

•After use, be sure to disconnect the AC cable.

•The battery becomes warm after use/ charge or during the charge. The camera also becomes warm during use. However, it is not a malfunction.

•The battery/AC adaptor supplied with this camera is exclusively designed for this camera. Do not use with any other equipment.

Image 11

Contents VQT0E58 Operating InstructionsDigital Camera Before use, please read these instructions completelyDear Customer Information for Your SafetyTrade Name FCC Note U.S. onlyReorient or relocate the receiving antenna Consult the dealer or an experienced radio/TV technician for helpRecording images basic ContentsSafety PreparationOthers Standard AccessoriesTop View Names of the Components8 9 12131415 1617 19 20 21 22 2324 25 Front ViewBottom View 33 34Left View Right View1/25 LCD Monitor Display/Viewfinder DisplayF2.8 1000 NOV Recording in Simple modeIn playback F2.83 Insert the battery into the camera. P12 Quick Guide9 12 1 Charge the battery. 1 # 2 P114 Remove the battery from the AC adaptor Charging the Battery2 Attach the battery to the AC adaptor. 1 # 3 When the CHARGE indicator B turns off, charging is finished1 Open the Memory Card/battery door Inserting the Battery2 Insert the charged battery all the way in, until it is locked 3 Close the Memory Card/battery doorª Charging time and available recording time ª Battery indicatorª Charging environment and charging error 3 Connect the DC cable supplied to the camera Using the AC Adaptor1 Connect the AC cable 2 Open the DC IN terminal door 2 Insert the card with the label facing the front of the camera Inserting the Card1 Open the Memory Card/battery door 2 Press the card to release 3 Pull the card out 4 Close the Memory Card/battery doorMultiMediaCard ª Access to the cardª SD Memory Card supplied and MultiMediaCard optional SD Memory Card2 Set the power switch to OFF Turning Power on/off1 Set the power switch to ON adjustment dial Adjusting the Viewfinder Diopter Adjustment3 Attach the lens hood 2 supplied Attaching the Lens Hood1 Remove the lens ring 2 Attach the lens hood adaptor supplied 3 Attach the lens cap ª Temporarily storing the lens hood1 Remove the lens hood 2 Reverse the lens hood and attach it 6 Attach the strap to the other side of the camera in the same way Attaching the Strap3 Pass the metal fitting through the eyelet of the camera 5 Move the cover in the direction of the arrow, and attach it firmly5 Attach the lens cap Attaching the Lens Cap1 Pass the top of the string through the lens cap 3 Pull in the direction of the arrowUsing the LCD Monitor/Viewfinder The Shutter Button Pressing halfway/Pressing fully The Mode Dial Sports mode P49 2 Press 3 Press 3/4 to choose the item 4 Press 2/1 to set the item Operating the Menu2,3,4 1 Press the MENU button3 Press 3/4 to select CLOCK SET, and then press Setting the Date/Time Clock Set1,6 2,3,4,5 1 Press the MENU button 2 Press 1 to make the setup menu appear1 Set the mode dial to P/A/S. P25 2 Press the MENU button Taking Pictures6,7 2,5 3,4 F2.8 1/25About jitter Press 3/4 to select PICT.MODE Taking Pictures in Simple ModeSet the mode dial to Simple mode Press the MENU button2 Press the button Checking the Captured Picture Review2 1,3,4 1 After taking a picture, press the 4/ REVIEW/SET buttonmode Recording Motion Images2,3,4 1 Set the mode dial to motion image2 Take a picture Using the Optical ZoomTo make subjects appear closer Tele Rotate towards T To make subjects appear further away Wide angle Rotate towards W3 Press 1 to set to ON 4 Press the MENU button Using the Digital Zoom1,4 2,3 1 Press the MENU button 2 Press 3/4 to select D.ZOOM1 Press OPEN button to open the Flash 2 Press Taking Pictures using the Built-in FlashP A S 3 Press in the direction of the arrow until it clicks To close the flashThe menu will disappear Using the Optical Image StabilizerPress 2/1 to select ON/OFF 4 Press the MENU button Using the AF Trigger1 Press the MENU button 2 Press 3/4 to select AF TRIGGER 3 Press 2/1 to select SHUTTER or3 Press 1 to select ON 4 Press the MENU button Using the Continuous AF1 Press the MENU button 2 Press 3/4 to select CONT.AF 2 Press the shutter button fully Taking Pictures with the Self-timerPress 5 Press the shutter button fully and take a picture Taking Pictures with Audio1,4 2,3 1 Press the MENU button 2 Press 3/4 to select AUDIO RECPICT.SIZE Changing the Picture Size1 Press the MENU button 2 Press 3/4 to select PICT.SIZE 3 Press 2/1 to select the picture sizeStandard Standard compression It gives priority to the number of Changing the Quality Data Compression Ratio1 Press the MENU button 2 Press 3/4 to select QUALITY 3 Press 2/1 to select the quality. Data Compression Ratio6 Press 7 Press 2/1 to set the aperture value Taking Pictures with Aperture-priority AE2,5 3,4,6,7,8 3,4 3 Press 3/4 to select AE MODE 4 Press 2/1 to set to A1/30 Taking Pictures with Shutter-priority AE3 Press 3/4 to select AE MODE 4 Press 1 to set to S 6 Press 7 Press 2/1 to set the shutter speedNormal Taking Pictures using Macro Mode5 cm Wide Macro mode1 Set the mode dial to Portrait mode Taking Pictures using Portrait ModeSet the mode dial to Sports mode Taking Pictures using Sports Mode1 Set the mode dial to Panning mode Taking Pictures using Panning ModeUsing a slower shutter speed when tracking a reduce the time for focusing while shooting a2 Set the mode dial to Night portrait mode 3 Take a picture Taking Pictures using Night Portrait Modeª When taking picture of only a landscape at night 1 Press OPEN button to open the flash5 Center the subject in the spot AF area 6 Take a picture Taking Pictures using Spot Mode1 Press the MENU button 2 Press 3/4 to select SPOT MODE 2 Press 2/1 to compensate the exposure Compensating the Exposure1,2,3 1 Press 3 until EXPOSURE is selected2 Press 1, then press 2/1 to set the exposure compensation range Taking Pictures using Auto Exposure AE Bracket1 Press 3 until AUTO BRACKET is selected Using the AF/AE Lock 3 Press 2/1 to select OFF, COOL, WARM or B/W Using the Color Effect1 Press the MENU button 2 Press 3/4 to select COL.EFFECT 3 Press 2/1 to select NATURAL, STANDARD or VIVID Adjusting the Color Tone or the Contrast Picture Adjustment1 Press the MENU button 2 Press 3/4 to select PICT.ADJ 3 Press 2/1 to select the mode Setting the White Balance1 Press the MENU button 2 Press 3/4 to select W.BALANCE 6 Press the MENU button 1,6 2,3,4 2,33 Press 1 to set to white set 4 Press2 Adjust the white balance with 2/1 Finely Adjusting the White Balance1 Press 3 until WB ADJUST. is selected SENSITIVITY Setting ISO Sensitivity1 Press the MENU button 2 Press 3/4 to select SENSITIVITY 3 Press 2/1 to select the sensitivity1 Press Taking Pictures using Burst ModeMCu“Multi-coated” and NDu“Neutral Density” Using the MC Protector/ND Filter3 Install the MC protector 2 or the ND filter 1 Remove the lens ring 2 Attach the lens hood adaptor2 Press 2 to play back the previous picture Playing Back Still Picturesª Fast forwarding/Fast rewinding 1 Set the mode dial to playbackPOWER SAVE 2,6 2,3 3,4,53 Press 1 to select the setup menu 4 Press 3/4 to select VOLUME SETUP 12 Press 3/4/2/1 to select images 9 Images Multi Playback1 2 4 5 7 8 1 During playback, rotate the zoom lever towardsª To delete a picture during the playback zoom Using the Playback Zoomnormal motion image playback Playing Back Motion Images1 Press 2/1 to select the file with the motion image icon 2 Press the 4/REVIEW/SET button to play back the motion imagePress 2 to select YES Deleting Images1,3,4 deleted5 Press 6 When this message is displayed 2,3,42,3,4,6,7 Delete all images5 Press 3/4 to select the number of sheets Writing the Print Information to the Card DPOF Setting2 Press 3/4 to select DPOF PRINT and then press 3 Select SINGLE and then press 4 Press 2/1 to select 1 image5 Press 3/4 to select the number of sheets to be printed 3 Press 3/4 to select MULTI and then press4 Press 2/1 to select the image 2,3,4,5 2,3,4,53 Press 3/4 to select CANCEL and then press 4 When this message is displayed1 Press the MENU button 2 Press 3/4 to select PROTECT and then press Protecting Images on the Card2 Press 3/4 to select SLIDE SHOW and then press Playing Back with Slide Show Automatic Playback2,3,4,5 4 Press 3/4/2/1 for setting belowIn motion image playback, Slide Show is not available 3 Press 2/1 to select the picture Adding Audio to Recorded Pictures Audio Dubbing1,6 2,3,4,5 2 Press 3/4 to select AUDIO DUB. and then press1 Press the MENU button 2 Press 3/4 to select RESIZE and then press Resizing Recorded Pictures1,8 2,3,4,5,6,7 6 When this message is displayed7 When this message is displayed Trimming Recorded Pictures1,9 2,3,5,7,8 4,5,61 Press the MENU button 2 Press 3/4 to select FORMAT and then press Formatting the Card1 2,3,4 3 When this message is displayed4 Press 2/1 to adjust the brightness 5 Press the MENU button Adjusting the LCD Monitor/Viewfinder Brightness1,5 2,3,4 1 Press the MENU button 2 Press 1 to open the setup menu3 Press 3/4 to select AUTO REVIEW 4 Press 2/1 to select 1SEC. or 3SEC Using the Auto Review1,5 2,3,4 3,4 2MIN SETUP 1/2AUTO REVIEW 4 Press 2/1 to choose the setting time Setting up the Power Save Mode3 Press 3/4 to select POWER SAVE 5 Press the 4/REVIEW/SET button 6 Press the MENU button Resetting the File Number3 Press 3/4 to select NO.RESET and then press “RESET FILE NO. IN THE CAMERA?”, press 2 to select YES7 Press the 4/REVIEW/SET button Initializing the settings3 Press 3/4 to select RESET and then press “RESET SETUP PARAMETERS?”, press 2 to select YES3 Turn the television on and select external input Playing Back Images with a TV Monitorª Viewing images in other countries 1 Connect the A/V cable 1 to the A/V OUT socket of the camera2 Connect the camera to a PC via the supplied USB connection cable Connecting to a PC2 Turn on a printer USB DIRECT-PRINT4 Press 2 to select YES 5 Press the 4/REVIEW/SET button USB DIRECT-PRINT Single Picture3 Press 2 to select YES 4 Press the 4/REVIEW/SET button USB DIRECT-PRINT DPOF Picture1 Press 1 to select DPOF PICTURE 2 Press the 4/REVIEW/SET button4 Remove the lens hood 5 Remove the lens hood adaptor After Use1 Turn the power switch to OFF. P17 2 Eject the card. P15 3 Remove the battery. P12REC mode menu The Menu ItemsPlayback mode menu NO.RESETSimple mode menu Cautions for Use Be sure to detach the battery after use When condensation has taken placeª Optimal Use of the Battery Always keep the terminals of the battery cleanCard Batteryª Cautions for Storage Digital cameraª Folder Composition Viewfinderª SD Slide Show Lens ringWarning Indications 12 The clock setting is reset Troubleshooting1 The power does not turn on. 1-1 Are the battery and the AC 11 When connecting to a PC images cannot be transferredDigital Camera SpecificationsPanasonic CGA-S002A Battery Charger/AC AdaptorBattery Pack lithium-ion Panasonic DE-928ADescription Digital Camera Accessory SystemAccessory# For USA Customers Digital Camera Accessory Order FormRequest for Service Notice Please include your proof of purchase Request for Service Notice For USA OnlyPanasonic Digital Still Camera Limited Warranty Limited Warranty For USA OnlyCarry-In or Mail-In Service Service in Puerto Rico Customer Services Directory For USA OnlyCentralized Factory Servicenter MAIL TOIndex 4 Introduzca la tarjeta en la cámara Spanish Quick Use Guide Guía española para el uso rápido1 Cargue la batería. 1 # 3 Introduzca la batería en la cámaraMemo Panasonic Sales Company PSC VQT0E58 F1003Sm0 1500 APanasonic Consumer Electronics Company Division of Matsushita Electric Corporation of America