Panasonic DMC-FZ2PP operating instructions ª Condensation, When condensation has taken place

Page 96

Others

After use, be sure to take the card out, and detach the battery or pull out the AC adaptor from the electrical outlet.

If the battery is left on the digital camera for a long time, the voltage drops excessively, and the battery will not function even after it is recharged.

When you use your digital camera on a rainy or snowy day or on a beach, make sure that no water enters the digital camera.

Water may cause the digital camera or card to malfunction. (Irreparable damage may occur)

If sea water splashes onto the digital camera, wet a soft cloth with tap water, wring it well, and use it to wipe the camera body carefully. Then, wipe it again thoroughly with a soft dry cloth.

ªCondensation

When using the camera outdoors during very cold weather, condensation can form on the camera and lens when you return to a warm place. The camera can be placed in a air tight plastic bag and allowed to warm. The condensation will form on the bag.

When condensation has taken place:

Set the power switch to [OFF] and leave the digital camera in this condition for about 1 hour.

When the camera becomes close to the ambient temperature, the fog disappears naturally.

ªOptimal Use of the Battery

The battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity, and, if the temperature is too high or too low, the operating time of the battery will be shorter.

Always keep the terminals of the battery clean.

Prevent the terminals from getting clogged with dirt, dust, or other substances.

If you drop the battery accidentally, check to see if the battery body and terminals are deformed. Attaching a deformed battery to the digital camera may damage the camera.

Be sure to detach the battery after use.

Be sure to detach the battery from the digital camera. (If it is left attached to the digital camera, a minute amount of current is consumed even when the digital camera power is off.) If the battery is left attached to the digital camera for a long time, discharge takes place. The battery may become unusable even after it is charged.

Dispose of an unusable battery.

The battery has a limited life.

Do not throw the battery into fire because it may cause an explosion.

Batteries that are no longer usable should be discarded in accordance with battery recycling laws.

For information you can call the RBRC hotline at 1-800-822-8837.

96

Image 96
Contents Operating Instructions Digital CameraBefore use, please read these instructions completely VQT0E58Information for Your Safety Dear CustomerFCC Note U.S. only Reorient or relocate the receiving antennaConsult the dealer or an experienced radio/TV technician for help Trade NameContents SafetyPreparation Recording images basicStandard Accessories OthersNames of the Components 8 9 12131415 1617 19 20 21 22 2324 25Front View Top View33 34 Left ViewRight View Bottom ViewLCD Monitor Display/Viewfinder Display F2.81/25 Recording in Simple mode In playbackF2.8 1000 NOVQuick Guide 9 121 Charge the battery. 1 # 2 P11 3 Insert the battery into the camera. P12Charging the Battery 2 Attach the battery to the AC adaptor. 1 #3 When the CHARGE indicator B turns off, charging is finished 4 Remove the battery from the AC adaptorInserting the Battery 2 Insert the charged battery all the way in, until it is locked3 Close the Memory Card/battery door 1 Open the Memory Card/battery doorª Battery indicator ª Charging environment and charging errorª Charging time and available recording time Using the AC Adaptor 1 Connect the AC cable 2 Open the DC IN terminal door3 Connect the DC cable supplied to the camera Inserting the Card 1 Open the Memory Card/battery door 2 Press the card to release3 Pull the card out 4 Close the Memory Card/battery door 2 Insert the card with the label facing the front of the cameraª Access to the card ª SD Memory Card supplied and MultiMediaCard optionalSD Memory Card MultiMediaCardTurning Power on/off 1 Set the power switch to ON2 Set the power switch to OFF Adjusting the Viewfinder Diopter Adjustment adjustment dialAttaching the Lens Hood 1 Remove the lens ring 2 Attach the lens hood adaptor supplied3 Attach the lens hood 2 supplied ª Temporarily storing the lens hood 1 Remove the lens hood 2 Reverse the lens hood and attach it3 Attach the lens cap Attaching the Strap 3 Pass the metal fitting through the eyelet of the camera5 Move the cover in the direction of the arrow, and attach it firmly 6 Attach the strap to the other side of the camera in the same wayAttaching the Lens Cap 1 Pass the top of the string through the lens cap3 Pull in the direction of the arrow 5 Attach the lens capUsing the LCD Monitor/Viewfinder The Shutter Button Pressing halfway/Pressing fully The Mode Dial Sports mode P49 Operating the Menu 2,3,41 Press the MENU button 2 Press 3 Press 3/4 to choose the item 4 Press 2/1 to set the itemSetting the Date/Time Clock Set 1,6 2,3,4,51 Press the MENU button 2 Press 1 to make the setup menu appear 3 Press 3/4 to select CLOCK SET, and then pressTaking Pictures 6,7 2,5 3,4F2.8 1/25 1 Set the mode dial to P/A/S. P25 2 Press the MENU buttonAbout jitter Taking Pictures in Simple Mode Set the mode dial to Simple modePress the MENU button Press 3/4 to select PICT.MODEChecking the Captured Picture Review 2 1,3,41 After taking a picture, press the 4/ REVIEW/SET button 2 Press the buttonRecording Motion Images 2,3,41 Set the mode dial to motion image modeUsing the Optical Zoom To make subjects appear closer Tele Rotate towards TTo make subjects appear further away Wide angle Rotate towards W 2 Take a pictureUsing the Digital Zoom 1,4 2,31 Press the MENU button 2 Press 3/4 to select D.ZOOM 3 Press 1 to set to ON 4 Press the MENU buttonTaking Pictures using the Built-in Flash P A S1 Press OPEN button to open the Flash 2 Press To close the flash 3 Press in the direction of the arrow until it clicksUsing the Optical Image Stabilizer Press 2/1 to select ON/OFFThe menu will disappear Using the AF Trigger 1 Press the MENU button 2 Press 3/4 to select AF TRIGGER3 Press 2/1 to select SHUTTER or 4 Press the MENU buttonUsing the Continuous AF 1 Press the MENU button 2 Press 3/4 to select CONT.AF3 Press 1 to select ON 4 Press the MENU button Taking Pictures with the Self-timer Press2 Press the shutter button fully Taking Pictures with Audio 1,4 2,31 Press the MENU button 2 Press 3/4 to select AUDIO REC 5 Press the shutter button fully and take a pictureChanging the Picture Size 1 Press the MENU button 2 Press 3/4 to select PICT.SIZE3 Press 2/1 to select the picture size PICT.SIZEChanging the Quality Data Compression Ratio 1 Press the MENU button 2 Press 3/4 to select QUALITY3 Press 2/1 to select the quality. Data Compression Ratio Standard Standard compression It gives priority to the number ofTaking Pictures with Aperture-priority AE 2,5 3,4,6,7,8 3,43 Press 3/4 to select AE MODE 4 Press 2/1 to set to A 6 Press 7 Press 2/1 to set the aperture valueTaking Pictures with Shutter-priority AE 3 Press 3/4 to select AE MODE 4 Press 1 to set to S6 Press 7 Press 2/1 to set the shutter speed 1/30Taking Pictures using Macro Mode 5 cm WideMacro mode NormalTaking Pictures using Portrait Mode 1 Set the mode dial to Portrait modeTaking Pictures using Sports Mode Set the mode dial to Sports modeTaking Pictures using Panning Mode Using a slower shutter speed when tracking areduce the time for focusing while shooting a 1 Set the mode dial to Panning modeTaking Pictures using Night Portrait Mode ª When taking picture of only a landscape at night1 Press OPEN button to open the flash 2 Set the mode dial to Night portrait mode 3 Take a pictureTaking Pictures using Spot Mode 1 Press the MENU button 2 Press 3/4 to select SPOT MODE5 Center the subject in the spot AF area 6 Take a picture Compensating the Exposure 1,2,31 Press 3 until EXPOSURE is selected 2 Press 2/1 to compensate the exposureTaking Pictures using Auto Exposure AE Bracket 1 Press 3 until AUTO BRACKET is selected2 Press 1, then press 2/1 to set the exposure compensation range Using the AF/AE Lock Using the Color Effect 1 Press the MENU button 2 Press 3/4 to select COL.EFFECT3 Press 2/1 to select OFF, COOL, WARM or B/W Adjusting the Color Tone or the Contrast Picture Adjustment 1 Press the MENU button 2 Press 3/4 to select PICT.ADJ3 Press 2/1 to select NATURAL, STANDARD or VIVID Setting the White Balance 1 Press the MENU button 2 Press 3/4 to select W.BALANCE3 Press 2/1 to select the mode 1,6 2,3,4 2,3 3 Press 1 to set to white set4 Press 6 Press the MENU buttonFinely Adjusting the White Balance 1 Press 3 until WB ADJUST. is selected2 Adjust the white balance with 2/1 Setting ISO Sensitivity 1 Press the MENU button 2 Press 3/4 to select SENSITIVITY3 Press 2/1 to select the sensitivity SENSITIVITYTaking Pictures using Burst Mode 1 PressUsing the MC Protector/ND Filter 3 Install the MC protector 2 or the ND filter1 Remove the lens ring 2 Attach the lens hood adaptor MCu“Multi-coated” and NDu“Neutral Density”Playing Back Still Pictures ª Fast forwarding/Fast rewinding1 Set the mode dial to playback 2 Press 2 to play back the previous picture2,6 2,3 3,4,5 3 Press 1 to select the setup menu 4 Press 3/4 to select VOLUMESETUP 1 POWER SAVE9 Images Multi Playback 1 2 4 5 7 81 During playback, rotate the zoom lever towards 2 Press 3/4/2/1 to select imagesUsing the Playback Zoom ª To delete a picture during the playback zoomPlaying Back Motion Images 1 Press 2/1 to select the file with the motion image icon2 Press the 4/REVIEW/SET button to play back the motion image normal motion image playbackDeleting Images 1,3,4deleted Press 2 to select YES2,3,4 2,3,4,6,7Delete all images 5 Press 6 When this message is displayedWriting the Print Information to the Card DPOF Setting 2 Press 3/4 to select DPOF PRINT and then press3 Select SINGLE and then press 4 Press 2/1 to select 1 image 5 Press 3/4 to select the number of sheets3 Press 3/4 to select MULTI and then press 4 Press 2/1 to select the image5 Press 3/4 to select the number of sheets to be printed 2,3,4,5 3 Press 3/4 to select CANCEL and then press4 When this message is displayed 2,3,4,5Protecting Images on the Card 1 Press the MENU button 2 Press 3/4 to select PROTECT and then pressPlaying Back with Slide Show Automatic Playback 2,3,4,54 Press 3/4/2/1 for setting below 2 Press 3/4 to select SLIDE SHOW and then pressIn motion image playback, Slide Show is not available Adding Audio to Recorded Pictures Audio Dubbing 1,6 2,3,4,52 Press 3/4 to select AUDIO DUB. and then press 3 Press 2/1 to select the pictureResizing Recorded Pictures 1,8 2,3,4,5,6,76 When this message is displayed 1 Press the MENU button 2 Press 3/4 to select RESIZE and then pressTrimming Recorded Pictures 1,9 2,3,5,7,84,5,6 7 When this message is displayedFormatting the Card 1 2,3,43 When this message is displayed 1 Press the MENU button 2 Press 3/4 to select FORMAT and then pressAdjusting the LCD Monitor/Viewfinder Brightness 1,5 2,3,41 Press the MENU button 2 Press 1 to open the setup menu 4 Press 2/1 to adjust the brightness 5 Press the MENU buttonUsing the Auto Review 1,5 2,3,4 3,43 Press 3/4 to select AUTO REVIEW 4 Press 2/1 to select 1SEC. or 3SEC SETUP 1/2 AUTO REVIEW2MIN Setting up the Power Save Mode 3 Press 3/4 to select POWER SAVE4 Press 2/1 to choose the setting time Resetting the File Number 3 Press 3/4 to select NO.RESET and then press“RESET FILE NO. IN THE CAMERA?”, press 2 to select YES 5 Press the 4/REVIEW/SET button 6 Press the MENU buttonInitializing the settings 3 Press 3/4 to select RESET and then press“RESET SETUP PARAMETERS?”, press 2 to select YES 7 Press the 4/REVIEW/SET buttonPlaying Back Images with a TV Monitor ª Viewing images in other countries1 Connect the A/V cable 1 to the A/V OUT socket of the camera 3 Turn the television on and select external inputConnecting to a PC 2 Connect the camera to a PC via the supplied USB connection cableUSB DIRECT-PRINT 2 Turn on a printerUSB DIRECT-PRINT Single Picture 4 Press 2 to select YES 5 Press the 4/REVIEW/SET buttonUSB DIRECT-PRINT DPOF Picture 1 Press 1 to select DPOF PICTURE2 Press the 4/REVIEW/SET button 3 Press 2 to select YES 4 Press the 4/REVIEW/SET buttonAfter Use 1 Turn the power switch to OFF. P172 Eject the card. P15 3 Remove the battery. P12 4 Remove the lens hood 5 Remove the lens hood adaptorThe Menu Items REC mode menuNO.RESET Simple mode menuPlayback mode menu Cautions for Use When condensation has taken place ª Optimal Use of the BatteryAlways keep the terminals of the battery clean Be sure to detach the battery after useBattery ª Cautions for StorageDigital camera CardViewfinder ª SD Slide ShowLens ring ª Folder CompositionWarning Indications Troubleshooting 1 The power does not turn on. 1-1 Are the battery and the AC11 When connecting to a PC images cannot be transferred 12 The clock setting is resetSpecifications Digital CameraBattery Charger/AC Adaptor Battery Pack lithium-ionPanasonic DE-928A Panasonic CGA-S002ADigital Camera Accessory System Accessory#Description Digital Camera Accessory Order Form For USA CustomersRequest for Service Notice For USA Only Request for Service Notice Please include your proof of purchaseLimited Warranty For USA Only Panasonic Digital Still Camera Limited WarrantyCarry-In or Mail-In Service Customer Services Directory For USA Only Centralized Factory ServicenterMAIL TO Service in Puerto RicoIndex Spanish Quick Use Guide Guía española para el uso rápido 1 Cargue la batería. 1 #3 Introduzca la batería en la cámara 4 Introduzca la tarjeta en la cámaraMemo VQT0E58 F1003Sm0 1500 A Panasonic Consumer Electronics CompanyDivision of Matsushita Electric Corporation of America Panasonic Sales Company PSC